HP SCP Software for s Tab Gamma Correction Color Mode without Color Management, Gray Balance

Page 66

Tab Gamma Correction (Color Mode without Color Management)

A gamma correction allows the adjustment of color shifts in the middle tone range.

Gamma (Gamma sliders)

You can select between the color spaces R G B (Red, Green, Blue) and CMY (Cyan, Magenta, Yellow). If you move all sliders at once, you will change the brightness of the image as a whole.

If you choose RGB, you will be able to alter the red, green and blue shifts. If your picture has, say, red shifts, you will neutralize this effect by reducing the gamma value of the red color bar.

If you choose CMY, you will be able to alter the cyan, magenta and yellow values. If your picture has, say, cyan shifts, you will neutralize this effect by reducing the gamma value of the cyan color bar.

Value range: 0.433 to 3.185

Default value: 1.0

Gray Balance

Select this option when your devices have failed to recognize colors. Do not US E CO LO R MANAGEMENT with this option.

Click the color picker and select a homogenous zone in the image that should represent the average of the grey tones. As an alternative, enter the values for the scanner colors in the entry fields.

66

Image 66
Contents SCP reprocontrol for HP Manual Content Create USER-DEFINED Formats REPROCONTROL.CLIENT Main Applications Setting the Black and White Points with the Pickers Emove Done JOB Records After Hardware Requirements Introduction / RequirementsSystem Requirements Operating SystemsInstallation Printer installationInstallation of the Hardlock Installation of the Program Reprocontrol.server Page Login Keycode Entry Hardware Configuration Printer ConfigurationPrinters / Queues Single Configuration Dialogs Delete PrinterPrinter Name Configuration WizardName / Connection Windows SpoolingPlacement Rotate AlignmentRollwidth tolerance Technical Label Configuration / Loaded Consumables Define MedialistDefault Settings for Print Options Page Calibration Calibration for RIPOn-site Calibration Spectrophotometer Profile Library Get ProfilesExport to Library Calibration Target Print TargetReset media parameters Edit media parametersEdit size correction Delete CalibrationTarget Selection Queue Create QueueTab General PrinterMedium Use Printer Default SettingsPicture Edit Settings Set Print SizeTab Output Options CopiesSet Output Size Priority Tab QueueQueue description De-/Activation of the QueueSet User Rights to change Queue Listen to LPRListen to raw port Tab Hpgl Simulation of a multiroll printer Create Printer ClusterLoad Sharing Cost optimizingPage Max. Print size Wait for best fitting Printer when busy Distribute jobs among similar printers of the clusterAllow monochrome prints on color printers Paper Format PreferencesTab General Create user-defined formatsShow warning when unsaved changes will be deleted Simple filter editor by Default for RIPShow warning when configuration changes UnitUse compressed transfer Files to Print Selection Menu Bar OptionsFile ExitConfiguration Printers/QueuesPreferences Set as default Load presetSave preset Apply Settings GloballyChange password Show button caption ViewPreview Show preflightDown Switch activeEdit Activate allActions InfoHelp Reprocontrol.client main applications BasicsFeatures of the Toolbar Start new job Reload JobPreview Select an Area Reset AOI Setting Apply FilteringRIP Preview Edit AOIShow Gamut Warning SoftproofEdit Images and Output FileUse Color Management Original Size Print SizePrint Mode FilterBrightness Pen Settings User Pen Settings Change Pen ColorSave / Load Pen Parameters Filter Editor Functions and Structure of the Filter EditorPreview of the Filter Editor Histogram Setting the Black and White Points with the Pickers Black Point AdaptiveContrast StaticWhite Point Adaptive Text/BackgroundTab Postprocessing Black & White Mode DespecklingTo use this filter Hole Filling InvertedTab Gamma Correction Color Mode without Color Management Gamma Gamma slidersGray Balance Tab Enhancement Color Mode with Color Management Sliders for the White PointAdaptive Sharpness Tab Special Filter All Modes except of Black & White ModeNone LevelHint Using the adaptive sharpness filter LimitDisplay Transfer Function Smooth SharpFilter Radius µm Tab Color Adjust Color Mode with Color Management Tab Color Exchange Color Mode with Color Management Lab Color Space Reprocontrol.WinDriver Use last settings WinDriver SettingsTab Settings Tab LogUsing the WinDriver Reprocontrol.monitor Tab JobsButton commands Tab Printers/Queues Tab ConnectionMenu Options Tab Configuration KeycodeJob Database Unit Costtracker SummaryDetails Page Preferences ExportCalibration of the costtracker Reprocontrol.backup