HP UX Patch Management manual Finally, remove the temporary depot

fr=1.0,fa=HP-UX_B.11.11_32/64 PHCO_28830.PAUX-ENG-A-MAN,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,

fr=1.0,fa=HP-UX_B.11.11_32/64 PHCO_28830.SEC-ENG-A-MAN,r=1.0,a=HP-UX_B.11.11_32/64,v=HP,

fr=1.0,fa=HP-UX_B.11.11_32/64

*Selection succeeded.

*Beginning Analysis and Execution

*Session selections have been saved in the file "/.sw/sessions/swcopy.last".

*The analysis phase succeeded for

"my_system:/my_depots/periodic_depot/".

*The execution phase succeeded for

"my_system:/my_depots/periodic_depot/".

*Analysis and Execution succeeded.

NOTE: More information may be found in the agent logfile using the command "swjob -a log my_system-1133 @ my_system:/my_depots/periodic_depot/".

======= 05/04/04 14:25:22 MDT END swcopy SESSION (non-interactive) (jobid=my_system-1133)

6.The periodic depot now contains the newly created bundle. $ swlist -d @ /my_depots/periodic_depot/

#Initializing...

#Contacting target "my_system"...

#Target: my_system:/my_depots/periodic_depot/

#
# Bundle(s):
#
PATCH_ASSESSMENT_05042004	1.0	May 04, 2004: HP-UX 11.11 Patch
Assessment Patches

7.Finally, remove the temporary depot.

$ swreg -u -l depot my_system:/my_depots/temporary_depot/ $ rm -r /my_depots/temporary_depot/

84 Using software depots for patch management