HP Essential Maintenance and UV Lamp Replacement for FB700 Ink Users
Page 65

●Minimize the quantity of cleaning liquid used during maintenance to avoid spills, contamination, or harm to printer parts. Carefully moisten cleaning cloths or swabs with the cleaning liquid, and ensure that none of it drips onto the printer. Any excess or residual liquid should be removed by cleaning the area with a dry cloth. Failure to clean off any residual cleaning liquid could cause damage to the printer, or could adversely affect the printer’s level of image quality.

●Disposal of waste must be in accordance with applicable regulations.

Replace UV lamp bulb (500–1000 hours)

The UV ink curing lamp bulbs will gradually emit light of diminishing intensity with use. To compensate, increase the power setting to the lamps. (From the control panel Media Page, press Wizard, then press Print Mode Specific Settings.) The UV lamp bulbs are warranted for 500 hours, but by operating them at low power initially, and increasing the power only when necessary to ensure a full curing of the ink, a service life of 1000 hours is possible.

Replace both bulbs at the same time, so that both bulbs emit light of equal intensity. Order quantity 2 of HP product number CH231A, HP UV Replacement Bulb Kit. The replacement procedure consists of these parts:

1.Removing the lamp housings from the carriage

2.Removing the old lamp bulbs

3.Installing the new lamp bulbs

4.Re-installing the lamp housings

Remove the lamp housings

1.From the control panel (System page > Tools > User Cleaning and Maintenance), select

Replace UV Lamp Bulb or Bulbs.

The control panel asks whether you want to proceed with changing the bulbs.

2.Press Yes.

The printer positions the rail and carriage for replacing the bulbs, then displays the prompt, “Select Lamp to Change.”

3.In most cases, select Both Lamps to replace both lamps (recommended). Otherwise, select the lamp to change.

4.Press Proceed.

This resets the lamp service hours counter to zero hours. Next, the control panel prompts you to power down the printer.

5.Turn off the power switch to the printer. Do not disconnect the main power cable from the printer: this ensures that the proper vacuum is maintained to the printheads, which prevents ink from leaking out.

6.Wait five minutes to allow any existing current to drain from the capacitors.

7.Open the top cover to access the printhead carriage.

ENWW

Replace UV lamp bulb (500–1000 hours) 59

Page 64 Page 66
Image 65
Page 64 Page 66
Contents HP Scitex FB500 Printer HP Scitex FB700 Printer Part number CQ114-90027 Revision B Table of contents Load inks Order accessories Functional specifications Physical Power Environmental Operating requirements IntroductionElectrical EnvironmentalRIP Important operating notesSafety warnings Input side Quick tourQuick tour Printheads Special featuresInk system Media handlingUse the HP Embedded Web Server Download a printer events file Update the printer softwareTransfer a custom media definition Display job accounting informationMedia Wizard Configure and load mediaConfigure media General Media Settings Work with the rigid media tables Load rigid media Use the camera to locate the sheets Multi-sheet N-UP Quick LoadIncomplete rows Load roll-fed mediaEnww Use the camera to locate the media Enww Load inks Load inksUnload an empty ink box Load a full ink boxYou can order the following ink supplies for your printer Order ink suppliesAvailable print modes Printing jobs2FB700 print modes and maximum print speeds Thumbnail screen Stored jobsProperties screen 2Position options with Auto Eject Off Position and eject optionsVisible Printing tipsIntroduction Use white inkWhite ink option overview Types of white ink printingWhite ink maintenance Home Use the control panelOverview Enww 2Home page with Attention message and View Attentions button PrintingPrinting Options menu Enww Media MediaInk Media Settings menuMaintenance menu Enww Tools menu SystemUser Cleaning and Maintenance Language Selection Settings menuSystem Information LicensePrinting Menu treeSystem MediaInk Lvds Enww Enww AutoJet When to calibrateCalibrate the printer Manual calibrations Auto calibrationsMedia Feed Calibration 1Media feed calibration pattern Manual BiDi RegistrationPress Printhead X Calibration in the menu Printhead X CalibrationPress Proceed Manual Jet MappingReport Individual Bad Jets Clear Individual Bad Jets Linearization Default Registration DataUnfixed Jets Report Enww Order accessories AccessoriesAccessories Schedule of tasks User cleaningClean the carriage home sensor monthly on Replace UV lamp bulb 500-1000 hours Remove the lamp housingsRemove the user-end lamp housing Remove the service-end lamp housing Enww Remove the old UV lamp bulb Enww Re-install the user-end lamp housing Re-install the lamp housingsRe-install the service-end lamp housing Clean the rail encoder strip bi-weeklyClean ionizer needles quarterly Clean and lubricate rail strips bi-weekly Clean and lubricate rail strips bi-weekly Clean the print head orifice plates bi-weekly Clean and lubricate the service station rails monthly Clean service station wiper monthly Clean carriage wheels monthly 20Location of carriage wheels User cleaning Enww Vacuum bottom of carriage monthly Clean the carriage home sensor monthlyClean the carriage home sensor monthly Replace the UV lamp filters quarterly Clean the electronics box filters quarterly Replace the service station wiper quarterly Clean the media thickness sensor roller quarterly Drain waste from service station quarterlyEnww Functional specifications SpecificationsPhysical PowerCEE 7/4 CEE 7/7 Environmental Table A-6Printer environmental specificationsTroubleshooting checklist TroubleshootingCallMe@hp Warranty claimsNorth America HP Customer CareEurope, Middle East, and Africa Asia and PacificEnww Startup and check jet health Image quality tipsStart with the printer in good working order Load media correctlyCheck jet health RIP settingsChoose a resolution Choose a color profile Color matchingEnww Index Enww

Scitex FB700 Industrial specifications

The HP Scitex FB700 is an industrial flatbed printer designed to meet the rigorous demands of high-quality large-format printing. Launched by HP, this printer offers businesses incredible versatility, speed, and precision, making it an essential tool for print service providers looking to enhance their productivity and expand their service offerings.

One of the standout features of the HP Scitex FB700 is its print quality. Equipped with HP's proprietary UV inks, the printer delivers vibrant colors, sharp images, and excellent durability. These inks are designed for a wide range of substrates, making it possible to print on materials such as rigid boards, flexible media, and even specialty applications like textiles. The FB700 supports a maximum print resolution of 1200 dpi, ensuring that every detail is faithfully rendered.

A key technology in the FB700 is its UV curing capability. This technology allows the printer to cure the inks almost instantly as they are applied, which not only speeds up the printing process but also enables printing on heat-sensitive materials. The ability to quickly switch between different substrates, from foam board to acrylic, offers unparalleled flexibility for businesses looking to meet diverse client needs.

Moreover, the HP Scitex FB700 features a user-friendly interface, enhanced by HP’s smart technology. This includes automated calibration and quality control systems that help maintain consistent print quality while reducing the likelihood of errors. The printer is also designed with ease of maintenance in mind, allowing operators to focus on production rather than troubleshooting.

In terms of productivity, the FB700 excels with a high throughput rate. Capable of producing prints up to 95 m² per hour, this printer is suited for high-volume jobs, enabling businesses to take on larger projects without sacrificing quality. Its robust design ensures reliability and efficiency, making it ideal for busy print environments.

Lastly, sustainability is an important consideration within the printing industry, and the HP Scitex FB700 addresses this concern by utilizing low-VOC inks and energy-efficient components. This commitment to eco-friendliness allows companies to meet their sustainability goals while maintaining a competitive edge in the market.

In summary, the HP Scitex FB700 Industrial printer is a powerful tool that combines high performance, versatility, and ease of use. With its advanced printing technologies, exceptional print quality, and commitment to sustainability, it is well-equipped to handle the diverse demands of modern printing applications.
Top Page Image Contents