HP Scitex FB700 Industrial manual Clean the carriage home sensor monthly on

Page 64

Table 9-1Schedule of cleaning tasks (continued)

Task and Frequency

Required supplies

 

 

Clean the carriage home sensor (monthly) on page 76

Long stick swab

 

Cleaning fluid

 

 

Replace the UV lamp filters (quarterly) on page 78

Lamp filter kit

 

 

Clean the electronics box filters (quarterly) on page 79

Vacuum cleaner

 

 

Replace the service station wiper (quarterly) on page 80

Wiper blade

 

 

Drain waste from service station (quarterly) on page 81

Waste ink container

 

 

Clean the media thickness sensor roller (quarterly) on page 81

One lint-free cleaning cloth

 

Cleaning fluid

 

 

Substitute cleaning procedures for air quality regulatory compliance

The various Air Quality Management Districts in California may have rules that restrict the use of cleaning solvents containing Volatile Organic Compounds (VOCs). This document provides alternative cleaning procedures for printers located in the areas of California where the use of solvents containing VOCs is restricted. These revised procedures supersede any previous instructions, guidelines, or recommendations issued by HP regarding the cleaning or maintenance of the relevant printers in California. Maintenance procedures that do not involve the use of VOCs for cleaning are not affected.

Printers located in California should not be cleaned using SolaChrome-UV Printhead Flush, HP UV Printhead Flush (HP product number CH122A) or isopropyl alcohol (IPA) unless other VOC compliance measures are in place. This includes the use of any product samples which came with the printer when it was purchased. Dispose of any remaining Printhead Flush in accordance with applicable regulations.

The compliant alternative liquid for cleaning and maintaining this printer is: Methyl Acetate (CAS# 79-20-9), at least 98% pure, undiluted.

Follow these safety guidelines when handling parts and cleaning chemicals:

●When handling parts and cleaning liquids use appropriate personal protective equipment (PPE) as prescribed in the Material Safety Data Sheet (MSDS). This includes the use of safety goggles, chemical protective gloves, and other protective personal clothing. Additional useful information may also be provided on websites operated by the Occupational Safety and Health Administration (OSHA) and the National Institute for Occupational Safety and Health.

●Only those components originally designated for cleaning with Printhead Flush or IPA should be cleaned with the alternative cleaning liquid.

●Methyl Acetate is a flammable liquid; read and adhere to the instructions in the MSDS document for safe handling and storage. State and local agencies or fire departments may impose additional requirements.

●Follow all health, safety and environmental protection regulations when using any solvents to clean or maintain the printer. An agency that administers health and safety regulations within the State of California is the Department of Industrial Regulations, Division of Occupational Safety and Health (Cal-OSHA).

58 Chapter 9 User cleaning

ENWW

Page 63 Page 65
Image 64
Page 63 Page 65
Contents HP Scitex FB500 Printer HP Scitex FB700 Printer Part number CQ114-90027 Revision B Table of contents Load inks Order accessories Functional specifications Physical Power Environmental Introduction Operating requirementsElectrical EnvironmentalImportant operating notes RIPSafety warnings Quick tour Input sideQuick tour Special features PrintheadsInk system Media handlingUse the HP Embedded Web Server Update the printer software Download a printer events fileTransfer a custom media definition Display job accounting informationConfigure media Configure and load mediaMedia Wizard General Media Settings Work with the rigid media tables Load rigid media Use the camera to locate the sheets Quick Load Multi-sheet N-UPLoad roll-fed media Incomplete rowsEnww Use the camera to locate the media Enww Load inks Load inksUnload an empty ink box Load a full ink boxOrder ink supplies You can order the following ink supplies for your printerPrinting jobs Available print modes2FB700 print modes and maximum print speeds Stored jobs Thumbnail screenProperties screen Position and eject options 2Position options with Auto Eject OffPrinting tips VisibleUse white ink IntroductionWhite ink option overview Types of white ink printingWhite ink maintenance Overview Use the control panelHome Enww Printing 2Home page with Attention message and View Attentions buttonPrinting Options menu Enww Media MediaMaintenance menu Media Settings menuInk Enww System Tools menuUser Cleaning and Maintenance Settings menu Language SelectionSystem Information LicenseMenu tree PrintingInk MediaSystem Lvds Enww Enww Calibrate the printer When to calibrateAutoJet Auto calibrations Manual calibrationsMedia Feed Calibration Manual BiDi Registration 1Media feed calibration patternPrinthead X Calibration Press Printhead X Calibration in the menuManual Jet Mapping Press ProceedReport Individual Bad Jets Clear Individual Bad Jets Unfixed Jets Report Default Registration DataLinearization Enww Accessories Order accessoriesAccessories User cleaning Schedule of tasksClean the carriage home sensor monthly on Remove the lamp housings Replace UV lamp bulb 500-1000 hoursRemove the user-end lamp housing Remove the service-end lamp housing Enww Remove the old UV lamp bulb Enww Re-install the lamp housings Re-install the user-end lamp housingClean the rail encoder strip bi-weekly Re-install the service-end lamp housingClean ionizer needles quarterly Clean and lubricate rail strips bi-weekly Clean and lubricate rail strips bi-weekly Clean the print head orifice plates bi-weekly Clean and lubricate the service station rails monthly Clean service station wiper monthly Clean carriage wheels monthly 20Location of carriage wheels User cleaning Enww Clean the carriage home sensor monthly Vacuum bottom of carriage monthlyClean the carriage home sensor monthly Replace the UV lamp filters quarterly Clean the electronics box filters quarterly Replace the service station wiper quarterly Drain waste from service station quarterly Clean the media thickness sensor roller quarterlyEnww Specifications Functional specificationsPower PhysicalCEE 7/4 CEE 7/7 Table A-6Printer environmental specifications EnvironmentalTroubleshooting Troubleshooting checklistWarranty claims CallMe@hpHP Customer Care North AmericaEurope, Middle East, and Africa Asia and PacificEnww Image quality tips Startup and check jet healthStart with the printer in good working order Load media correctlyChoose a resolution RIP settingsCheck jet health Color matching Choose a color profileEnww Index Enww

Scitex FB700 Industrial specifications

The HP Scitex FB700 is an industrial flatbed printer designed to meet the rigorous demands of high-quality large-format printing. Launched by HP, this printer offers businesses incredible versatility, speed, and precision, making it an essential tool for print service providers looking to enhance their productivity and expand their service offerings.

One of the standout features of the HP Scitex FB700 is its print quality. Equipped with HP's proprietary UV inks, the printer delivers vibrant colors, sharp images, and excellent durability. These inks are designed for a wide range of substrates, making it possible to print on materials such as rigid boards, flexible media, and even specialty applications like textiles. The FB700 supports a maximum print resolution of 1200 dpi, ensuring that every detail is faithfully rendered.

A key technology in the FB700 is its UV curing capability. This technology allows the printer to cure the inks almost instantly as they are applied, which not only speeds up the printing process but also enables printing on heat-sensitive materials. The ability to quickly switch between different substrates, from foam board to acrylic, offers unparalleled flexibility for businesses looking to meet diverse client needs.

Moreover, the HP Scitex FB700 features a user-friendly interface, enhanced by HP’s smart technology. This includes automated calibration and quality control systems that help maintain consistent print quality while reducing the likelihood of errors. The printer is also designed with ease of maintenance in mind, allowing operators to focus on production rather than troubleshooting.

In terms of productivity, the FB700 excels with a high throughput rate. Capable of producing prints up to 95 m² per hour, this printer is suited for high-volume jobs, enabling businesses to take on larger projects without sacrificing quality. Its robust design ensures reliability and efficiency, making it ideal for busy print environments.

Lastly, sustainability is an important consideration within the printing industry, and the HP Scitex FB700 addresses this concern by utilizing low-VOC inks and energy-efficient components. This commitment to eco-friendliness allows companies to meet their sustainability goals while maintaining a competitive edge in the market.

In summary, the HP Scitex FB700 Industrial printer is a powerful tool that combines high performance, versatility, and ease of use. With its advanced printing technologies, exceptional print quality, and commitment to sustainability, it is well-equipped to handle the diverse demands of modern printing applications.
Top Page Image Contents