HP Scitex FB700 Industrial manual Use white ink, Introduction, White ink option overview

Page 33

5 Use white ink

Introduction

With the white ink option available from HP, you can replace the light magenta and light cyan inks with white ink, resulting in four colors of ink plus white ink. This enables you to print with white ink using various techniques.

Printing with white ink may require special preparation of the image to be printed or special setup in the RIP. Refer to the documentation provided with the application software and RIP for step-by-step procedures.

White ink option overview

White ink printing is available as an option that can be delivered with a new printer or as a field upgrade to an existing printer. If the option is delivered with a new printer, it is installed with the new printer. In the case of a field upgrade, the option is designed to be installed either by a service technician or by the customer operator.

The white ink option consists of two parts (see instructions that accompany the kit for detailed instructions):

●White ink option upgrade — a one-time process that upgrades the printer to a white-ink capable printer

●White ink conversion — replaces the existing light cyan and light magenta inks in the printer with white ink.

Refer to the White Ink Upgrade Kit Installation Instructions, HP part number CQ114–90006, included in the white ink upgrade accessory kit, for detailed instructions for the upgrade and conversion.

Types of white ink printing

Many different design effects can be achieved with white ink that would not be possible otherwise, especially when printing on dark, colored, metallic, or clear media. There are three basic design techniques for printing with white ink:

●Under-fill — a solid rectangle (or irregular shape) of printed white ink that is cured, then a color image is printed on top of it. When used on a non-white, transparent, or reflective surface, this can provide better color saturation or allow colors that are similar to the media color to be visible.

●Over-fill — a color image is printed and cured, a solid rectangle (or irregular shape) of white ink is printed on top of it. This is most often printed on clear media to create a sign that is viewed on a light box (for example, a shopping mall map, airport advertisement, or bus stop signage).

When viewed from the opposite side of the media on which it was printed, the image must be reversed (mirrored) in the RIP or application software before printing.

●Spot color — any white shape (including text) that is cured with and in the same plane as the rest of the artwork, rather than in a separate plane or layer. In conventional (analog) offset or screen printing, this might be called a “knockout,” because none of the colors are overprinted.

NOTE: When printing a CMYK or CMYKcm image without a white under-fill on non-white media, color saturation may be reduced, depending on the color of the media used.

ENWW

Introduction 27

Page 32 Page 34
Image 33
Page 32 Page 34
Contents HP Scitex FB500 Printer HP Scitex FB700 Printer Part number CQ114-90027 Revision B Table of contents Load inks Order accessories Functional specifications Physical Power Environmental Operating requirements IntroductionElectrical EnvironmentalRIP Important operating notesSafety warnings Input side Quick tourQuick tour Printheads Special featuresInk system Media handlingUse the HP Embedded Web Server Download a printer events file Update the printer softwareTransfer a custom media definition Display job accounting informationConfigure and load media Configure mediaMedia Wizard General Media Settings Work with the rigid media tables Load rigid media Use the camera to locate the sheets Multi-sheet N-UP Quick LoadIncomplete rows Load roll-fed mediaEnww Use the camera to locate the media Enww Load inks Load inksUnload an empty ink box Load a full ink boxYou can order the following ink supplies for your printer Order ink suppliesAvailable print modes Printing jobs2FB700 print modes and maximum print speeds Thumbnail screen Stored jobsProperties screen 2Position options with Auto Eject Off Position and eject optionsVisible Printing tipsIntroduction Use white inkWhite ink option overview Types of white ink printingWhite ink maintenance Use the control panel OverviewHome Enww 2Home page with Attention message and View Attentions button PrintingPrinting Options menu Enww Media MediaMedia Settings menu Maintenance menuInk Enww Tools menu SystemUser Cleaning and Maintenance Language Selection Settings menuSystem Information LicensePrinting Menu treeMedia InkSystem Lvds Enww Enww When to calibrate Calibrate the printerAutoJet Manual calibrations Auto calibrationsMedia Feed Calibration 1Media feed calibration pattern Manual BiDi RegistrationPress Printhead X Calibration in the menu Printhead X CalibrationPress Proceed Manual Jet MappingReport Individual Bad Jets Clear Individual Bad Jets Default Registration Data Unfixed Jets ReportLinearization Enww Order accessories AccessoriesAccessories Schedule of tasks User cleaningClean the carriage home sensor monthly on Replace UV lamp bulb 500-1000 hours Remove the lamp housingsRemove the user-end lamp housing Remove the service-end lamp housing Enww Remove the old UV lamp bulb Enww Re-install the user-end lamp housing Re-install the lamp housingsRe-install the service-end lamp housing Clean the rail encoder strip bi-weeklyClean ionizer needles quarterly Clean and lubricate rail strips bi-weekly Clean and lubricate rail strips bi-weekly Clean the print head orifice plates bi-weekly Clean and lubricate the service station rails monthly Clean service station wiper monthly Clean carriage wheels monthly 20Location of carriage wheels User cleaning Enww Vacuum bottom of carriage monthly Clean the carriage home sensor monthlyClean the carriage home sensor monthly Replace the UV lamp filters quarterly Clean the electronics box filters quarterly Replace the service station wiper quarterly Clean the media thickness sensor roller quarterly Drain waste from service station quarterlyEnww Functional specifications SpecificationsPhysical PowerCEE 7/4 CEE 7/7 Environmental Table A-6Printer environmental specificationsTroubleshooting checklist TroubleshootingCallMe@hp Warranty claimsNorth America HP Customer CareEurope, Middle East, and Africa Asia and PacificEnww Startup and check jet health Image quality tipsStart with the printer in good working order Load media correctlyRIP settings Choose a resolutionCheck jet health Choose a color profile Color matchingEnww Index Enww

Scitex FB700 Industrial specifications

The HP Scitex FB700 is an industrial flatbed printer designed to meet the rigorous demands of high-quality large-format printing. Launched by HP, this printer offers businesses incredible versatility, speed, and precision, making it an essential tool for print service providers looking to enhance their productivity and expand their service offerings.

One of the standout features of the HP Scitex FB700 is its print quality. Equipped with HP's proprietary UV inks, the printer delivers vibrant colors, sharp images, and excellent durability. These inks are designed for a wide range of substrates, making it possible to print on materials such as rigid boards, flexible media, and even specialty applications like textiles. The FB700 supports a maximum print resolution of 1200 dpi, ensuring that every detail is faithfully rendered.

A key technology in the FB700 is its UV curing capability. This technology allows the printer to cure the inks almost instantly as they are applied, which not only speeds up the printing process but also enables printing on heat-sensitive materials. The ability to quickly switch between different substrates, from foam board to acrylic, offers unparalleled flexibility for businesses looking to meet diverse client needs.

Moreover, the HP Scitex FB700 features a user-friendly interface, enhanced by HP’s smart technology. This includes automated calibration and quality control systems that help maintain consistent print quality while reducing the likelihood of errors. The printer is also designed with ease of maintenance in mind, allowing operators to focus on production rather than troubleshooting.

In terms of productivity, the FB700 excels with a high throughput rate. Capable of producing prints up to 95 m² per hour, this printer is suited for high-volume jobs, enabling businesses to take on larger projects without sacrificing quality. Its robust design ensures reliability and efficiency, making it ideal for busy print environments.

Lastly, sustainability is an important consideration within the printing industry, and the HP Scitex FB700 addresses this concern by utilizing low-VOC inks and energy-efficient components. This commitment to eco-friendliness allows companies to meet their sustainability goals while maintaining a competitive edge in the market.

In summary, the HP Scitex FB700 Industrial printer is a powerful tool that combines high performance, versatility, and ease of use. With its advanced printing technologies, exceptional print quality, and commitment to sustainability, it is well-equipped to handle the diverse demands of modern printing applications.
Top Page Image Contents