how to use the scanner
1Place the originals
2Press the SCAN DOCUMENT button ( ). The What are you scanning? dialog box appears.
3Choose the appropriate settings, and then click Scan.
4When you are finished scanning, click Done. The software sends the scanned file to the specified location.
Note: If you want to preview scans before they are sent to their destination, see preview a scanned image.
Note: To create a searchable PDF from your scan, select the Scan for editable text (OCR)? option in the What are you scanning? dialog box. When you are done scanning your document, save it as a PDF. For more information about OCR scanning, see scan text for editing on page 6.
scan pictures
Use the SCAN PICTURE button ( ) to scan printed photos, graphics, slides, or negatives.
1Place the original
2Press the SCAN PICTURE button ( ).
3When you are finished scanning, click Done. The image is scanned into the HP Photo & Imaging Gallery.
Note: If you want to preview scans before they are sent to their destination, see preview a scanned image.
Tip: The HP Scanning software can automatically correct your pictures or restore faded colors in old pictures. To turn picture correction on or off, select Auto Correct Photos from the Basic menu of the HP Director, and then choose the options you want.
preview a scanned image
By default, the software does not prompt you to preview the scan when you use any of the
If you want to preview the scanned file, either begin the scan from the
HP Director instead of using the buttons on the front of the scanner, or change the button settings in the HP Director to allow previews.
user’s manual | 4 |