HP 5590 5590 manual To load negatives into the TMA light source, To complete the scanning process

Page 16

chapter 3

to load negatives into the TMA light source

1Load a negative strip into the negative holder.

Note: Make sure that the shiny side faces the scanner glass when the TMA light source is in position on the scanner glass. (The emulsion side is dull.)

Caution! Negatives are easily damaged. Touch them only on their edges.

2If you are scanning a negative strip with fewer than four frames, insert the negative light shield after you load the negative strip. Use the arrow icons on the negative light shield to position it correctly.

3Slide the negative holder into the slide holder on the bottom side of the TMA light source.

1

2

1 - Load the negative strip into the negative holder with a negative light shield 2 - Slide the negative holder into the slide holder of the TMA light source

Note: The negative holder is stored in the TMA light source, within the slide holder.

to complete the scanning process

1Place the TMA light source into the positioning plate with the slides or negatives facing down. The TMA cable should fit in the groove that is on the same end of the positioning plate as the reference marks.

Place the TMA light source on the positioning plate

2 Press the SCAN PICTURE button ( ) on the front of the scanner.

11	hp scanjet 5590 digital flatbed scanner

Image 16

Contents Scanjet 5590 Digital flatbed Scanner Page Hp scanjet 5590 digital flatbed scanner User’s manual Copyright and license Trademark creditsContents Install the scanning software How to use the scannerSoftware options Description Front panel and accessories overview Feature DescriptionScanning overview Automatic document feeder ADFSelect original types Scan documentsScan pictures Preview a scanned imageSave a document to a disk or CD Mail a scanned document or picturePrint copies Use your e-mail program to complete and send the e-mailCancel a scan Use the Power Save buttonChange settings Scan text for editingChoose acceptable media for the ADF Document feederLoad originals in the ADF Scan two-sided documents from the ADF Make copies from the ADFHow to scan slides and negatives Set up the TMATips for scanning transparent items To connect the TMA cable to its port on the scannerScan slides or negatives To start the scanning processTo load slides into the TMA light source Insert slides or negatives into the TMA light sourceTo complete the scanning process To load negatives into the TMA light sourcePress the Scan Picture button on the front of the scanner Click Accept when the image adjustments are complete Care and maintenance Clean the scanner glassClean the TMA Clean and maintain the ADFRun the cleaning cloth through the ADF Clean the ADF windowChapter Clean the feed-roller assembly manually Order maintenance suppliesMaintain the ADF Troubleshooting Scanner installation or setup problemsScanner initialization or hardware problems Reset the scannerAdditional troubleshooting information Scanner has stopped working properlyProduct support Accessibility website Hp scanjet websiteSupport process Phone support in the United States Locations Phone-support periodPhone support in Europe, Middle East, and Africa Page +82 1588-3003 Seoul Other phone support worldwideOutside Seoul Regulatory information and product Specifications Scanner specifications with ADF where indicatedTransparent materials adapter TMA specifications Name DescriptionEnvironmental specifications for the scanner, ADF, and TMA Automatic document feeder ADF specificationsPurchase accessories Page L1910-90109