HP 700 manual Busy Redial, No Answer Redial, Answer Ring Pattern, Error Correction Mode

First then press press

Menu	6
then	2
press

Menu	6
then	3
press

Busy Redial

The HP OfficeJet is factory set to automatically redial at intervals after a busy signal. You can turn this setting off.

Note: To immediately redial the last fax number you entered on the HP OfficeJet keypad, press the Redial/Pause button.

No Answer Redial

You can set the HP OfficeJet to automatically redial at intervals if a fax call is not answered.

Two

Menu	6
then	4
press

Menu	6
then	5
press

Answer Ring Pattern

The Answer Ring Pattern setting applies only if your phone line has more than one number, each with its own distinctive ring pattern. This is a service provided by your telephone company. If you do not have this service, the Distinctive Ring feature on the HP OfficeJet will not work and the Answer Ring Pattern should be set to All Rings.

If you do have Distinctive Ring service, have your telephone company assign one ring pattern to voice calls and another to fax calls. Then use the Answer Ring Pattern setting to set your HP OfficeJet to automatically answer the fax call pattern.

Note: If you have an answering machine on this line for receiving voice calls (using one of the other distinctive ring patterns), set it to answer after 3 or more rings or your HP OfficeJet will not receive fax calls.

Error Correction Mode

Error Correction Mode (ECM) reduces data lost due to poor phone lines. In ECM, phone charges are unaffected, or may even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably.

.........................................................................................................................................

2-5