3Connecting to a Windows NT Server 3.51 Windows 95 SR2
If you are using a Vectra VE7/VE8, follow the instructions below to complete the procedure.
If you are using a VL8 or VL7, go directly to step 9.
aClick on "Start" then "Settings" and open the "Control Panel."
b
cSelect "Adapter" and click on "Add."
dClick on "Have Disk", insert the Intel Etherexpress Pro10+ drivers disk and set the path to "A:\." (If you have an
eClick on "OK" and select the Intel EtherExpress ™ PRO/10+ and hit enter.
fWith the Intel Etherexpress PRO10+ listed in the "Network" window, click on the "Identification" folder and specify your Computer Name, Workgroup, and Computer Description. (If you do not have the re- quired information, contact your network administrator.)
gClick on the "OK" button, approve the basic configuration and files will copy.
hWhen prompted for the file "NETAPI.DLL", set the path to your Win- dows 95 files and click on "OK." (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\)
iClick on the "Yes" button to finish the installation and restart your com- puter.
9When Windows 95 restarts, a message will appear to indicate that new hardware has been found.
10Click on “Next” to continue installation then insert the Intel EtherExpress drivers disk.
11Click on “Other Locations…”, set the path to “A:\”, and click on “Finish.” (If you have an
12When prompted for the file “EPRONDI.DLL”, with the Intel EtherExpress drivers disk inserted, set the path to “A:\” and click “OK.”
(If you have an
13Click “OK” to the “Network” dialog box to provide computer / work group