1Connecting to a Netware 3.12 Server Windows 95 SR2
8Power on the machine and allow it to boot to Windows 95 SR2. If you are using a Vectra VL8 or VL7, go directly to step 9.
If you are using a Vectra VE7/VE8, follow the instructions below and then go to step 16.
a Click on "Start" then "Settings" and open the "Control Panel." b
c Select "Adapter" and click on "Add."
d Click on "Have Disk", insert the Intel Etherexpress Pro10+ drivers disk and set the path to "A:\." (If you have an
e Click on "OK" and select the Intel EtherExpress ™ PRO/10+ and hit enter.
f With the Intel Etherexpress PRO10+ listed in the "Network" window, click on the "Identification" folder and specify your Computer Name, Workgroup, and Computer Description. (If you do not have the re- quired information, contact your network administrator.)
g Click on the "OK" button, approve the basic configuration and files will copy.
9When Windows 95 restarts, a message will appear to indicate that new hardware has been found.
10Click on “Next” to continue installation then insert the Intel EtherExpress drivers disk.
11Click on “Other Locations…”, set the path to “A:\”, and click on “Finish.” (If you have an
12When prompted for the file “EPRONDI.DLL”, with the Intel EtherExpress drivers disk inserted, set the path to “A:\” and click “OK.”
(If you have an
13Click “OK” to the “Network” dialog box to provide computer / work group names.
14Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator.)