1 Connecting to a Netware 3.12 Server
Windows for Workgroups Version 3.11
Windows for Workgroups Version 3.11
1 Connecting to a Netware 3.12 Server
Requirements
•HP Vectra with DOS and
•Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers disk.
•Vectra VL8 and VL7 Driver Name: EPRO.386 Size: 16K Date: 10/22/96.
•Vectra VE7/VE8 Driver Name: EPROODI.INS Size: 784B Date: 10/26/95.
•Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
•Netware Client for DOS and MS Windows
Device Configuration
|
|
| Vectra VL8 | Vectra VL7 |
| Vectra VE7/VE8 |
|
|
|
|
|
|
|
| I/O Address |
|
| |||
|
|
|
|
|
|
|
| Interrupt |
| 10 | 10 |
| 11 |
|
|
|
|
| ||
• | Board Connector type | |||||
• | Force | operation | Yes |
| ||
• | Flash chip address | Disabled | ||||
• | Remote boot program | None |
| |||
Procedure
1With the HP Vectra turned off, install the Intel EtherExpress PRO 10 ISA Ethernet adapter card into an ISA slot.
2Connect network cable media to the Intel EtherExpress card.
3Power on the machine.
4After booting, insert the Intel EtherExpress drivers disk Ver. 3.5”, and execute “A:\SOFTSET2.EXE.”
5Select “Change Adapter configuration” and verify the resource settings