Soleus Air SG-WAC-18HCE manual THRU-THE-WALL Installation, Installing the Chassis into the Cabinet

Page 11

ASSEMBLY & INSTALLATION (CONT.)

Installing the Chassis into the Cabinet

1.Team lift (two people) the air conditioner chassis and carefully slide it into the cabinet. Let the front of the air conditioner hang out approximately 6”.

2.CAUTION: DO NOT PUSH ON THE CONTROLS OR FINNED COILS.

3.Be sure the chassis is firmly seated in the back of the cabinet.

4.Insert all screws removed during window installation and reattach the front face plate, front panel, and the air filter. Use the REMOVE CHASSIS instructions and figures 1-6 for reference.

THRU-THE-WALL INSTALLATION

NOTE: Consult local building codes prior to installation and/or a qualified carpenter.

Select the Wall Location

This air conditioner has a slide-out chassis, so that it can be installed through an outside wall as specified below:

MAX WALL THICKNESS: 10”

IMPORTANT: The side louvers must never be blocked.

NOTE: All parts needed for Thru-The-Wall Installation are provided, except a wood frame, shims, and 10 wood screws (10-1” long minimum). Select a wall surface that:

1.Does not support major structural loads such as the frame construction at ends of windows, and under truss-bearing points, etc.

2.Does not have plumbing or wiring inside.

3.Is near existing electrical outlets, or where another out- let can or will be installed.

4.Does not have objects blocking the air vents which limits cooling.

5.Allows unblocked airflow from the rear and sides of the air conditioner.

Prepare the Wall

1.Prepare the wall in frame construction (including brick and stucco veneer). Working from inside the room, find the wall stud that is nearest the center of the installa- tion area.

2.Cut a hole on each side of the center stud.

3.Measure between the inside edges of every other stud as shown below.

FIG. 1

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SG-WAC-18HCE Important Safety Instructions Recommended Ground Method Lcdi Power Cord and PlugElectrical Requirements Non-Hardware Packing List Parts List Tools NeededModel SpecificationsDisclaimer Storm Window Requirements Installation & Assembly InstructionsPrior to Installing the Air Conditioner Window PreparationPage Remove Chassis Installation & Assembly Instructions Window MountingPlacing the Cabinet Inside the Window Assembly & InstallationTop Angle Rail and Side Bracket Installation TOP ViewMark Install Support BracketsInstall the Window Lock and Sash Seal Extend the Accordion PanelsPrepare the Wall THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Select the Wall LocationPrepare and Install the Cabinet Assembly & Installation THRU-THE-WALLSupport Bracket Wooden Strip Masonry ConstructionNormal Operating Sounds Using Your AIR ConditionerElectronic Control Panel & Remote Control Remote ControlUsing Your AIR Conditioner Using Your AIR Conditioner Winter Storage Care and CleaningAir Filter Cleaning Cabinet CleaningProblem Possible Causes Solutions TroubleshootingWater collects in the base pan Water is dripping outsideWater is dripping inside the room One Year Limited Warranty Warranty

SG-WAC-18HCE specifications

The Soleus Air SG-WAC-18HCE is a versatile and efficient window air conditioning unit designed to provide optimal cooling solutions for medium to large-sized rooms. With a cooling capacity of 18,000 BTUs, this model effectively combats the heat and humidity, ensuring a comfortable indoor environment. The unit is engineered with advanced technologies and features that enhance usability, energy efficiency, and overall performance.

One of the standout features of the SG-WAC-18HCE is its Energy Efficiency Ratio (EER) rating, which helps users save on electricity bills while still enjoying effective cooling. The appliance is equipped with a programmable timer, enabling users to set specific operating hours and temperature preferences. This results in further energy savings, as the unit can be programmed to cool only when needed.

The air conditioner also includes a variety of airflow settings, making it adaptable to individual preferences. Its three cooling speeds and two fan speeds allow for customizable comfort levels, while the 4-way adjustable air direction ensures that air circulation is optimized throughout the room. Furthermore, the unit operates quietly, thanks to its innovative design, making it suitable for bedrooms and workspaces where noise reduction is a priority.

Installation is simplified with the included user-friendly instructions, and the removable, washable filter allows for easy maintenance and improved air quality. The SG-WAC-18HCE is also equipped with a dehumidification function, which extracts excess moisture from the air, creating a more comfortable living space during humid weather conditions.

Safety features have not been overlooked in this model. It comes with a built-in safety switch that automatically shuts off the unit if it overheats, providing peace of mind for users. Additionally, the unit includes a “Follow Me” feature that utilizes the remote control’s built-in thermostat to sense the temperature of the room, allowing for more precise temperature control.

Overall, the Soleus Air SG-WAC-18HCE is an excellent choice for anyone looking for a reliable and efficient window air conditioner. With its robust cooling capacity, energy-saving features, quiet operation, and user-friendly design, it stands out as an effective solution for ensuring a cool and comfortable home environment during the hot summer months.
Top Page Image Contents