Soleus Air SG-WAC-18HCE manual Installation & Assembly Instructions, Window Preparation

Page 6

INSTALLATION & ASSEMBLY INSTRUCTIONS

Window Preparation

Please read all instructions prior to installing your air conditioner. Two people are recommended to install this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing the unit.

Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit inside a standard double-hung window. Make sure the window is in good shape and able to firmly hold the needed screws. If not, make repairs prior to installing the unit.

Model

SG-WAC-18HCE

 

 

Unit Height

17 3/4”

 

 

Unit Width

23 5/8”

 

 

Min. Window Opening (See

18 1/2”

FIG 1)

 

 

 

Min. Window Width

26 1/2”

 

 

Max Window Width

40 1/2”

 

 

Storm Window Requirements

A storm window frame will not allow the air conditioner to tilt properly which in turn will keep it from draining properly. To adjust for this, attach a board or piece of wood to the sill. The board or wood piece should have a depth of at least 1 1/2”. Make sure the board or piece of wood is approximately 1/2” higher than the storm window frame. This will allow the air conditioner to tilt enough for proper drainage. (See FIG. 2).

FIG. 1

SASH

Storm window frame or obstruction

FIG. 2

Storm window frame or obstruction

SASH

Board or wood piece must be approximately 1/2” higher than the storm window frame for proper drainage

Prior to Installing the Air Conditioner

1.Check for anything that could block airflow. Check the area outside of the window for things such as shrubs, trees, or awnings. Check the inside area to make sure curtains, drapes, or blinds will not prevent proper airflow.

2.Check the available electrical outlet. The power supply must be the same as shown on the unit serial nameplate (located on the left side of the unit, near the front faceplate). Be sure the outlet is close enough for the power cord to reach.

3.Carefully unpack the air conditioner. Remove all packing material and make sure the floor is protected when remov- ing. Due to the large size of this air conditioner, two people should move the unit together.

When handling the unit, be careful to avoid cuts from the sharp metal edges and aluminum fins on the front and rear coils.

6

Image 6
Contents SG-WAC-18HCE Important Safety Instructions Lcdi Power Cord and Plug Electrical RequirementsRecommended Ground Method Parts List Tools Needed Non-Hardware Packing ListSpecifications DisclaimerModel Window Preparation Installation & Assembly InstructionsPrior to Installing the Air Conditioner Storm Window RequirementsPage Installation & Assembly Instructions Window Mounting Remove ChassisTOP View Assembly & InstallationTop Angle Rail and Side Bracket Installation Placing the Cabinet Inside the WindowExtend the Accordion Panels Install Support BracketsInstall the Window Lock and Sash Seal MarkSelect the Wall Location THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Prepare the WallAssembly & Installation THRU-THE-WALL Prepare and Install the CabinetMasonry Construction Support Bracket Wooden StripRemote Control Using Your AIR ConditionerElectronic Control Panel & Remote Control Normal Operating SoundsUsing Your AIR Conditioner Using Your AIR Conditioner Cabinet Cleaning Care and CleaningAir Filter Cleaning Winter StorageTroubleshooting Problem Possible Causes SolutionsWater is dripping outside Water is dripping inside the roomWater collects in the base pan Warranty One Year Limited Warranty

SG-WAC-18HCE specifications

The Soleus Air SG-WAC-18HCE is a versatile and efficient window air conditioning unit designed to provide optimal cooling solutions for medium to large-sized rooms. With a cooling capacity of 18,000 BTUs, this model effectively combats the heat and humidity, ensuring a comfortable indoor environment. The unit is engineered with advanced technologies and features that enhance usability, energy efficiency, and overall performance.

One of the standout features of the SG-WAC-18HCE is its Energy Efficiency Ratio (EER) rating, which helps users save on electricity bills while still enjoying effective cooling. The appliance is equipped with a programmable timer, enabling users to set specific operating hours and temperature preferences. This results in further energy savings, as the unit can be programmed to cool only when needed.

The air conditioner also includes a variety of airflow settings, making it adaptable to individual preferences. Its three cooling speeds and two fan speeds allow for customizable comfort levels, while the 4-way adjustable air direction ensures that air circulation is optimized throughout the room. Furthermore, the unit operates quietly, thanks to its innovative design, making it suitable for bedrooms and workspaces where noise reduction is a priority.

Installation is simplified with the included user-friendly instructions, and the removable, washable filter allows for easy maintenance and improved air quality. The SG-WAC-18HCE is also equipped with a dehumidification function, which extracts excess moisture from the air, creating a more comfortable living space during humid weather conditions.

Safety features have not been overlooked in this model. It comes with a built-in safety switch that automatically shuts off the unit if it overheats, providing peace of mind for users. Additionally, the unit includes a “Follow Me” feature that utilizes the remote control’s built-in thermostat to sense the temperature of the room, allowing for more precise temperature control.

Overall, the Soleus Air SG-WAC-18HCE is an excellent choice for anyone looking for a reliable and efficient window air conditioner. With its robust cooling capacity, energy-saving features, quiet operation, and user-friendly design, it stands out as an effective solution for ensuring a cool and comfortable home environment during the hot summer months.