Installation, Unpacking and checks | MGE UPS Systems 4.5 kVA, 6 kVA

2. Installation

2.1 Unpacking and checks

Comet EXtreme 4.5 and 6 kVA

Electronic module

battery module

22RS 232 communications cable.

23CD ROM with "Solution Pac" and "UPS Driver" softwares.

24Quick Start documentation.

Page 12 - 51033212EN/AC

22

23

24

25

2223

26

24

25

25

27

25 27

26

25Installation and user manual.

26Telescopic rails for mounting in 19" bay with mounting hardware.

27Cable for connection to battery module.

Image 12

MGE UPS Systems 4.5 kVA, 6 kVA, 9 kVA, 12 kVA user manual Installation, Unpacking and checks, Electronic module Battery module

Contents

Installation Comet EXtreme Introduction Using this document ForewordPictograms Contents Failure of AC input power and operation on battery power Glossary Index Presentation Comet EXtreme range6 kVA tower models 6 kVA rack models 12 kVA tower models 12 kVA rack models Back Comet EXtreme 4.5 and 6 kVAComet EXtreme 9 and 12 kVA EPO Emergency Power Off Battery extensions for UPS backup times of 80 minutesBattery extensions for 4.5 or 6 kVA Comet EXtreme Options Battery extensions for 9 or 12 kVA Comet EXtreme CLA Alarms Battery Load Remaining Control panel Installation Electronic module Battery moduleUnpacking and checks Electronic module Installation of the rack version Rack mounting diagram with rails Battery-module connections Check that the battery circuit breaker 2 is OFF Installation of the communications-card option Connection to the RS 232 communications port optional Always connect the earthing wire first Connection to the connection modules ON-LINE operating mode Operation When button 15 is pressed Start-upBargraph indications Failure of AC input power and operation on battery power Personalizable function Default setting PersonalizationFunction On / OFF conditions tab Battery tab Personalizable function Default setting OptionsOutput tab By-pass tab Connected equipment is no longer supplied with power Shutdown Maintenance TroubleshootingFrench Training Center on Montbonnot site USA Training Center on Costa Mesa site Maintenance Replacement of the electronic module Disconnecting the connection module Reconnecting the connection module Connected equipment is again protected by the UPS UPS recycling at the end of service life EnvironmentThis product has been designed to respect the environment Packing ON-LINE mode AppendicesGlossary Manual bypass Sleep mode Start on battery powerTolerance for AC-power Out of tolerance Index UPS Driver 32 51033212EN/AC