Comet EXtreme 9 and 12 kVA | MGE UPS Systems 6 kVA, 4.5 kVA, 9 kVA

2. Installation

Comet EXtreme 9 and 12 kVA

Electronic module

22

23

24

25

2223

26

2425

Battery module

25

27

27

25

2727

26

22RS 232 communications cable.

23CD ROM with "Solution Pac" and "UPS Driver" softwares.

24Quick Start documentation.

25Installation and user manual.

26Telescopic rails for mounting in 19" bay with mounting hardware.

27Cable for connection to battery module.

51033212EN/AC - Page 13

Image 13

MGE UPS Systems 6 kVA, 4.5 kVA, 9 kVA user manual Comet EXtreme 9 and 12 kVA, Electronic module

Contents

Comet EXtreme Installation Introduction Foreword Using this documentPictograms Contents Glossary Index Failure of AC input power and operation on battery power Comet EXtreme range Presentation6 kVA tower models 6 kVA rack models 12 kVA tower models 12 kVA rack models Comet EXtreme 4.5 and 6 kVA BackComet EXtreme 9 and 12 kVA Battery extensions for UPS backup times of 80 minutes EPO Emergency Power OffBattery extensions for 4.5 or 6 kVA Comet EXtreme Options CLA Battery extensions for 9 or 12 kVA Comet EXtreme Control panel Alarms Battery Load Remaining Electronic module Battery module InstallationUnpacking and checks Electronic module Rack mounting diagram with rails Installation of the rack version Check that the battery circuit breaker 2 is OFF Battery-module connections Connection to the RS 232 communications port optional Installation of the communications-card option Connection to the connection modules Always connect the earthing wire first Operation ON-LINE operating mode Start-up When button 15 is pressedBargraph indications Failure of AC input power and operation on battery power Personalization Personalizable function Default settingFunction On / OFF conditions tab Personalizable function Default setting Options Battery tabOutput tab By-pass tab Shutdown Connected equipment is no longer supplied with power Troubleshooting MaintenanceFrench Training Center on Montbonnot site USA Training Center on Costa Mesa site Maintenance Disconnecting the connection module Replacement of the electronic module Connected equipment is again protected by the UPS Reconnecting the connection module Environment UPS recycling at the end of service lifeThis product has been designed to respect the environment Packing Appendices ON-LINE modeGlossary Manual bypass Start on battery power Sleep modeTolerance for AC-power Out of tolerance UPS Driver Index 32 51033212EN/AC