Battery-module connections | MGE UPS Systems 12 kVA, 4.5 kVA, 6 kVA

2. Installation

2.3 Battery-module connections

Comet EXtreme 4.5 and 6 kVA

Check that the battery circuit breaker 2 is OFF.

	Connect cable 27 to the connectors 4 of the electronic and
2	battery modules.
2
4
27

Comet EXtreme 9 and 12 kVA

Check that the battery circuit breaker 2 is OFF.

2

4

27

4

Connect cable 27 to the connectors 4 of the electronic and battery modules.

51033212EN/AC - Page 15

Image 15

MGE UPS Systems 12 kVA, 4.5 kVA, 6 kVA, 9 kVA Battery-module connections, Check that the battery circuit breaker 2 is OFF

Contents

Comet EXtreme Installation Introduction Using this document ForewordPictograms Contents Glossary Index Failure of AC input power and operation on battery power 6 kVA rack models PresentationComet EXtreme range 6 kVA tower models 12 kVA tower models 12 kVA rack models Back Comet EXtreme 4.5 and 6 kVAComet EXtreme 9 and 12 kVA Options EPO Emergency Power OffBattery extensions for UPS backup times of 80 minutes Battery extensions for 4.5 or 6 kVA Comet EXtreme CLA Battery extensions for 9 or 12 kVA Comet EXtreme Control panel Alarms Battery Load Remaining Installation Electronic module Battery moduleUnpacking and checks Electronic module Rack mounting diagram with rails Installation of the rack version Check that the battery circuit breaker 2 is OFF Battery-module connections Connection to the RS 232 communications port optional Installation of the communications-card option Connection to the connection modules Always connect the earthing wire first Operation ON-LINE operating mode When button 15 is pressed Start-upBargraph indications Failure of AC input power and operation on battery power On / OFF conditions tab Personalizable function Default settingPersonalization Function By-pass tab Battery tabPersonalizable function Default setting Options Output tab Shutdown Connected equipment is no longer supplied with power USA Training Center on Costa Mesa site MaintenanceTroubleshooting French Training Center on Montbonnot site Maintenance Disconnecting the connection module Replacement of the electronic module Connected equipment is again protected by the UPS Reconnecting the connection module Packing UPS recycling at the end of service lifeEnvironment This product has been designed to respect the environment Manual bypass ON-LINE modeAppendices Glossary Out of tolerance Sleep modeStart on battery power Tolerance for AC-power UPS Driver Index 32 51033212EN/AC