Environment, Packing | MGE UPS Systems 4.5 kVA, 6 kVA, 9 kVA, 12 kVA

5. Environment

This product has been designed to respect the environment:

It does not contain CFCs or HCFCs.

It was manufactured in a factory certified ISO 14001.

UPS recycling at the end of service life:

MGE UPS SYSTEMS undertakes to recycle, by certified companies and in compliance with all applicable regulations, all UPS products recovered at the end of their service life (contact your branch office).

Packing:

UPS packing materials must be recycled in compliance with all applicable regulations.

Warning:

This product contains lead-acid batteries. Lead is a dangerous substance for the environment if it is not correctly recycled by specialized companies.

Web site : www.mgeups.com

Page 28 - 51033212EN/AC

Image 28

MGE UPS Systems 4.5 kVA, 6 kVA, 9 kVA Environment, This product has been designed to respect the environment, Packing

Contents

Installation Comet EXtreme Introduction Foreword Using this documentPictograms Contents Failure of AC input power and operation on battery power Glossary Index Presentation Comet EXtreme range6 kVA tower models 6 kVA rack models 12 kVA tower models 12 kVA rack models Comet EXtreme 4.5 and 6 kVA BackComet EXtreme 9 and 12 kVA EPO Emergency Power Off Battery extensions for UPS backup times of 80 minutesBattery extensions for 4.5 or 6 kVA Comet EXtreme Options Battery extensions for 9 or 12 kVA Comet EXtreme CLA Alarms Battery Load Remaining Control panel Electronic module Battery module InstallationUnpacking and checks Electronic module Installation of the rack version Rack mounting diagram with rails Battery-module connections Check that the battery circuit breaker 2 is OFF Installation of the communications-card option Connection to the RS 232 communications port optional Always connect the earthing wire first Connection to the connection modules ON-LINE operating mode Operation Start-up When button 15 is pressedBargraph indications Failure of AC input power and operation on battery power Personalizable function Default setting PersonalizationFunction On / OFF conditions tab Battery tab Personalizable function Default setting OptionsOutput tab By-pass tab Connected equipment is no longer supplied with power Shutdown Maintenance TroubleshootingFrench Training Center on Montbonnot site USA Training Center on Costa Mesa site Maintenance Replacement of the electronic module Disconnecting the connection module Reconnecting the connection module Connected equipment is again protected by the UPS UPS recycling at the end of service life EnvironmentThis product has been designed to respect the environment Packing ON-LINE mode AppendicesGlossary Manual bypass Sleep mode Start on battery powerTolerance for AC-power Out of tolerance Index UPS Driver 32 51033212EN/AC