MGE UPS Systems 9 kVA Out of tolerance, Percent load, Personalization, Sleep mode, Via software

6. Appendices

Out of tolerance	The AC input source is either absent or its voltage or frequency is outside the
	set limits.
Percent load	Ratio between the power drawn by the connected equipment and the total
	power that the UPS can supply.
Personalization	A number of UPS functions can be modified using the "UPS Driver" software
	to better meet the user's needs.
Sleep mode	This function shuts down the UPS after 5 minutes when it operates on
	battery power and no load is detected on the UPS output. The UPS restarts
	automatically as soon as the AC input source is restored.
Start on battery power	This function makes it possible to energize the connected equipment even
	when AC input power is not available (operation exclusively on battery power).
Tolerance for AC-power	The range of frequency supplied by the AC-power source within which
source frequency	the UPS can operate in ON-LINE mode (double conversion).
UPS	Uninterruptible Power Supply.
UPS ON / OFF	It is possible to enable or disable use of UPS ON / OFF controls
via software	by the computer-system protection software.

Page 30 - 51033212EN/AC