Back, Comet EXtreme 4.5 and 6 kVA | MGE UPS Systems 4.5 kVA, 9 kVA

1. Presentation

1.2 Back

Comet EXtreme 4.5 and 6 kVA

1 RS232 communications port.

2	Battery circuit breaker.

3 Communications-card option.

4	EXB battery module connectors.
5	Connector for battery extension modules.
6	Rating plate.
7	Manual by-pass switch.
8	Connection module.
9	Output terminal block.
10	Input terminal block.

Comet EXtreme 9 and 12 kVA

4 EXB battery modules connectors.

Page 8 - 51033212EN/AC

Image 8

MGE UPS Systems 4.5 kVA, 9 kVA user manual Back, Comet EXtreme 4.5 and 6 kVA, Comet EXtreme 9 and 12 kVA

Contents

Installation Comet EXtreme Introduction Pictograms Using this documentForeword Contents Failure of AC input power and operation on battery power Glossary Index Presentation Comet EXtreme range6 kVA tower models 6 kVA rack models 12 kVA tower models 12 kVA rack models Comet EXtreme 9 and 12 kVA BackComet EXtreme 4.5 and 6 kVA EPO Emergency Power Off Battery extensions for UPS backup times of 80 minutesBattery extensions for 4.5 or 6 kVA Comet EXtreme Options Battery extensions for 9 or 12 kVA Comet EXtreme CLA Alarms Battery Load Remaining Control panel Unpacking and checks InstallationElectronic module Battery module Electronic module Installation of the rack version Rack mounting diagram with rails Battery-module connections Check that the battery circuit breaker 2 is OFF Installation of the communications-card option Connection to the RS 232 communications port optional Always connect the earthing wire first Connection to the connection modules ON-LINE operating mode Operation Bargraph indications When button 15 is pressedStart-up Failure of AC input power and operation on battery power Personalizable function Default setting PersonalizationFunction On / OFF conditions tab Battery tab Personalizable function Default setting OptionsOutput tab By-pass tab Connected equipment is no longer supplied with power Shutdown Maintenance TroubleshootingFrench Training Center on Montbonnot site USA Training Center on Costa Mesa site Maintenance Replacement of the electronic module Disconnecting the connection module Reconnecting the connection module Connected equipment is again protected by the UPS UPS recycling at the end of service life EnvironmentThis product has been designed to respect the environment Packing ON-LINE mode AppendicesGlossary Manual bypass Sleep mode Start on battery powerTolerance for AC-power Out of tolerance Index UPS Driver 32 51033212EN/AC