![](/images/new-backgrounds/1311003/31100327x1.webp)
CONNECTING THE HI-DEF DIGITAL SIGNAGE MEDIA PLAYER
How to Connect the Hi-Def Digital Signage Media Player
1.Connect
NOTE: If using the
2.OPTIONAL: Connect the analog or digital audio outputs of the
3. Connect the included USB 2.0 flash drive (or external USB 2.0 hard drive) to the USB port located on the rear panel of the
IMPORTANT: The USB drive must always be connected to the Media Player before power is applied.
4.Connect the included 12V DC power adapter between the power input
of the
Wiring Diagram for the Hi-Def Digital Signage Media Player
USB Flash Drive
or
USB External HDD
Router
Audio Receiver
USB CABLE
HDMI CABLE
COMPOSITE CABLE
COMPONENT CABLE
TOSLINK
Display using Component
Display using Composite
Display using HDMI
ATTENTION: This product should always be connected to a grounded electrical socket.
11