STAND-ALONE MODE

Using Stand-Alone Mode

1.Connect the Hi-Def Digital Signage Media Player according to the instructions on page 11.

STOP: Make sure the USB storage device is connected to the Media Player before power is connected.

The Media Player comes pre-loaded with a demo playlist, schedule, and content. After the Hi-Def Digital Signage Media Player has finished booting, the pre-loaded content will begin playing.

2.Press the HOME button on the IR Remote Control to stop the playback of the content and access the Input PIN Code screen.

NOTE: You can also simply enter the PIN code from the IR Remote Control while content is playing, to display the Input PIN Code screen. Press the OK button to display the Main Menu.

3. Type in the PIN code:

4.From the Main Menu, press the Eject button on the IR Remote Control. This button will safely eject the USB device before removal.

WARNING: Removing the USB device without ejecting may cause the storage device to become unreadable, resulting in the loss or corruption of content and related files.

20

Page 23
Image 23
Gefen EXT-HD-DSMP user manual STAND-ALONE Mode, Using Stand-Alone Mode