SETTINGS.XML SUMMARY
| Setting the Active Schedule |
Tag Name: | <schedule> |
Description: | Sets the active schedule. |
Attributes: | activeSchedule |
Example : | <schedule> |
| <activeSchedule value=”/schedules/ |
| schedule.gsh” /> |
| </schedule> |
| Display Configuration |
Tag Name: | <display> |
Description: | Sets the output resolution and enables / disables underscan. |
Attributes: | output |
| videoReduceSize |
Example : | <display> |
| <output value=”NTSC1080I” /> |
| <NTSC720P /> |
| <NTSC1080I /> |
| <NTSC1080P /> |
| <PAL720P /> |
| <PAL1080I /> |
| <PAL1080P /> |
| <videoReduceSize value=”enable” /> |
| <disable /> |
| <enable /> |
| </display> |
Notes: | In the example above, 1080i is the output resolution. All |
| available output resolutions are listed below the output |
| attribute. Both NTSC and PAL formats are supported. |
| The videoReduceSize attribute enables / disables |
| underscan mode. In this example, underscan is enabled. |
| Set the videoReduceSize attribute to ”disable” to |
| bypass underscan mode. |
53
