PULL MODE
Method 2: Configuration using the settings.xml file
ADVANCED: Before editing the settings.xml file, it is recommended that you are familiar with XML (eXtended Markup Language). If you are unfamiliar with XML, you should review pages 45 and 46 before continuing.
1.Open the settings.xml file and locate the <ipConfig> section:
<name value=”Gefen Player” />
<ipConfig>
<ipMode value=”manual” /> <automatic />
<manual>
<ip value=”192.168.2.238” />
<subnet value=”255.255.255.0” /> <gateway value=”0.0.0.0” /> <dns1 value=”4.2.2.2” />
<dns2 value=”8.8.8.8” /> </manual>
</ipConfig>
<osdConfig>
2.DHCP or a static IP address can be used:
a) If DHCP is being used, then set the <ipMode value> tag to automatic . Any information under the <manual> tag will be ignored.
b) If a static IP is being used, then the <ipMode value> tag should be set to the IP address that will be assigned to the
3. Next, locate the <pullConfig> tags:
<pullConfig>
<pullMode value=”enable” /> <disable />
<enable>
<pullURL value=”192.168.2.70” /> <settingPull value=”192.168.2.70” /> <schedulePull value=”192.168.2.70/schedules” /> <playlistPull value=”192.168.2.70/playlists” /> <contentPull value=”192.168.2.70/media” /> <pullLogUpload value=”192.168.2.70” />
...
...
41
