The printer is plugged in, but it will not turn on.
Solution
●The printer may have drawn too much power.
If the optional HP Photosmart Internal Battery is not installed in the printer, unplug the printer power cord from the electrical outlet. Wait about 30 seconds, and then plug the power cord back in. Turn on the printer.
If the optional HP Photosmart Internal Battery is installed in the printer, unplug the printer power cord from the electrical outlet if it is plugged in. Open the battery compartment cover and remove the battery. Wait about 30 seconds, and then reinstall the battery. Plug in the power cord. Turn on the printer.
●The printer may be plugged into a power strip that is turned off. Turn on the power strip, and then turn on the printer.
●The printer may be plugged into an incompatible power source. If you are traveling abroad, make sure the power source in the country/region you are visiting complies with the power requirements and power cord of the printer.
46 | HP Photosmart A310 series |