HP 810C Put the paper into the in tray, print, Print Side Down, Side down For More Information

1Setting Up Your Printer with a Parallel Printer Cable

2Remove a stack of paper from its packaging. (Make sure all the paper in the stack is the same size and type.) Tap the stack on a flat surface to even it up.

3Put the paper into the IN tray, print

side down. You can insert up to 10 mm or 3/8 inch at a time.

4 Push the paper toward the back of the paper tray until it stops.

5 Slide both paper adjusters to fit

snug against the paperÕs edges.	6410007
make sure the paper lies flat in the
tray and that the paper fits under
the tab of the paper-length
adjuster.

6 Then slide the IN tray all the way back in.

If it is up, flip the OUT tray back down.

6410008

Print Side Down

Most paper prints better on one side than on the other. This is especially true for coated or specially treated paper. The print side is usually indicated on the paper package. Be sure you insert the paper into the IN tray of the printer with the print

side down.

For More Information:

Go to ÒPrinting CardsÓ on page 46 for information on how to load small-sized paper. Go to ÒPrinting BannersÓ on page 51 for how to print on banner paper. Go to ÒHow to Print on Different Paper SizesÓ on page 35 for information on using papers of different sizes.

8