HP 2000 Base Model manual Product notice

Page 2

©Copyright 2014 Hewlett-Packard Development Company, L.P.

Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: April 2014

Document Part Number: 761488-001

Product notice

This guide describes features that are common to most models. Some features may not be available on your computer.

Not all features are available in all editions of Windows 8. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows 8 functionality. See http://www.microsoft.com for details.

This computer may require upgraded and/ or separately purchased hardware and/or a DVD drive to install the Windows 7 software and take full advantage of Windows 7 functionality. See http://windows.microsoft.com/en-us/windows7/get-know-windows-7 for details.

Software terms

By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a refund subject to the refund policy of your place of purchase.

For any further information or to request a full refund of the computer, please contact your local point of sale (the seller).

Image 2
Contents Hardware Reference Guide Product notice About This Book Iv About This Book Table of contents Preventing electrostatic damage Grounding methods Product Models Standard featuresProduct overview Page Rear components Connecting a serial device Hardware upgrades Tools neededPage Adjusting the tilt angle Unfolding the standRouting cables to external devices Page Replacing the power supply Page Page Installing optional HP integrated USB peripheral modules Page Page Page Installing memory DDR3-SDRAM SodimmRemove the front panel. See Removing the front panel on Removing the front panel Page Replacing the front panel Page Replacing the hard drive Page Page Replacing the battery Remove the front panel. See Removing the front panel on Securing the RP2 to a counter top Installing an external security lock Cable lockPadlock Touch screen calibration Configuring the softwareConfiguring the MSR Configuring powered serial ports Troubleshooting Table A-1Diagnostic Front Panel LEDs and Audible CodesAppendix a Troubleshooting Activity Beeps Possible Cause Grounding methods Electrostatic dischargePreventing electrostatic damage Touch screen maintenance Computer operating guidelines and routine careShipping preparation Index
Related manuals
Manual 24 pages 33.22 Kb Manual 115 pages 52.59 Kb