HP ZBook 15 Mobile manual Specifications, Input power, Operating environment

Page 87

C Specifications

Input power

The power information in this section may be helpful if you plan to travel internationally with the computer.

The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.

The computer can operate on DC power within the following specifications.

Input Power	Rating

Operating voltage and current	19.5	V dc @ 6.15 A - 120 W, Slim Smart AC Adapter (select models only)
	19.5	V dc @ 7.69 A - 150 W, Slim Smart ACA dapter (select models only)
	19.5	V dc @ 10.3A - 200 W, Slim Smart AC Adapter (select models only)

NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 265 V rms.

NOTE: The computer operating voltage and current can be found on the system regulatory label inside the battery bay.

Operating environment

Factor	Metric	U.S.

Temperature

Operating	5°C to 35°C	41°F to 95°F

Nonoperating	-20°C to 60°C	-4°F to 140°F

Relative humidity (noncondensing)

Operating	10% to 90%	10% to 90%

Nonoperating	5% to 95%	5% to 95%

Maximum altitude (unpressurized)

Operating	-15 m to 3,048 m	-50 ft to 10,000 ft

Nonoperating	-15 m to 12,192 m	-50 ft to 40,000 ft

Input power 77

Image 87

Contents HP Notebook Product notice Safety warning notice Iv Safety warning notice Table of contents VGA Vii Security Input power Operating environment Page Welcome Resources For information about Finding informationGetting to know your computer TopTouchPad Lights Select Computer Control Center Buttons and fingerprint reader select models onlyFn key KeysFront Environmental Notices RightLeft See Using a USB device onRear Display Bottom Bottom Turning wireless devices on and off Using an Internet service provider ISPIdentifying wireless and network status icons Creating a wireless connectionUsing the operating system controls Using a WlanConnecting to an existing Wlan Setting up a new WlanProtecting your Wlan Roaming to another network Using Bluetooth wireless devices select models onlyConnecting to a wired network Connecting to a local area network LAN select models onlyPage Using the keyboard Keyboard and pointing devicesIdentifying the hot keys Using an optional external numeric keypad Using the TouchPadUsing keypads Using the integrated numeric keypadUsing TouchPad gestures NavigatingSelecting Scrolling TappingRotating select models only Pinching/ZoomingUsing the pointing stick Setting pointing device preferencesUsing the audio features Adjusting the volumeMultimedia Using the webcam select models only Using video devicesChecking your audio functions Select Configure Display Settings Click Detect Monitors DisplayPort Shutting down the computer Power managementSetting power options Using power-saving statesInitiating and exiting Hibernation Using the Power iconUsing power management Initiating and exiting SuspendViewing the current power management settings Using battery powerDisplaying the remaining battery charge Inserting or removing the batteryCharging a battery Maximizing battery life Managing low battery levelsIdentifying low battery levels Conserving battery power Storing a batteryResolving a low battery level Testing an AC adapter Using external AC powerDisposing of a used battery Replacing the batteryPage Removing or replacing the service cover DrivesHandling drives Replacing the service cover Removing the service coverRemoving the hard drive Replacing or upgrading the hard drivePage Installing a hard drive Removing a memory card Using memory cardsExternal cards and devices Inserting a memory cardUsing smart cards select models only Using ExpressCards select models only Inserting a smart cardRemoving a smart card Inserting an ExpressCard Configuring an ExpressCardRemoving an ExpressCard Using a USB deviceConnecting a USB device Using optional external devicesUsing optional external drives Using the docking connectorMemory modules Page Page Using passwords SecurityProtecting the computer Setting passwords in the operating system Setting passwords in Computer SetupManaging a Bios administrator password Entering a DriveLock password Using a Computer Setup DriveLock passwordEntering a Bios administrator password Managing a DriveLock passwordUsing Computer Setup Automatic DriveLock Using firewall softwareManaging an Automatic DriveLock password Installing an optional security cable Using the fingerprint reader select models onlyEnabling fingerprint authentication during logon Select the Use Fingerprint Reader option Enrolling your fingerprintBacking up your information Backup and RecoveryCreating backups Creating restore mediaPerforming a system recovery Remove everything and reinstall Sled Navigating and selecting in Computer Setup Computer Setup Bios and Advanced System DiagnosticsStarting Computer Setup Using Computer SetupUpdating the Bios Restoring factory settings in Computer SetupDetermining the Bios version Downloading a Bios update Using Advanced System Diagnostics About the boot device order MultiBootConsidering boot order changes Enabling boot devices in Computer SetupSetting a new boot order in Computer Setup Choosing MultiBoot preferencesDynamically choosing a boot device using the f9 prompt Setting a MultiBoot Express promptEntering MultiBoot Express preferences Troubleshooting Troubleshooting and supportWireless network connection is not working Computer is unusually warmAn external device is not working Computer does not detect the optical drive Disc does not playMovie is not visible on an external display Contacting support Labels Serial number Product number Cleaning the display Cleaning your computerCleaning products Cleaning proceduresCleaning the TouchPad, keyboard, or mouse Specifications Input powerOperating environment Electrostatic discharge