HP ZBook 14 Mobile manual

Page 17

4.Disconnect the power cord from the power outlet, and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.Remove the computer from the stand.

6.Lay the unit flat on a stable surface with the right side up.

7.Release the latch (1) on the left side of the rear I/O panel, rotate the I/O panel (2) to the right, and then lift it off the computer.

8.Move the access panel latch (1) to the left to release the access panel.

9.Slide the access panel (2) approximately 6 mm (.24 in) toward the back of the chassis, and then lift the panel off of the computer.

Removing and replacing the access panel 11

Image 17

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Preventing electrostatic damage Grounding methods Standard features Product featuresFront panel components Rear panel components Ctrl key Using the keyboardAdditional function keys Special mouse functionsWindows Logo Key Serial number location Hardware changes Connecting the power cord Attaching the stand Removing the access panel Removing and replacing the access panelPage Replacing the access panel Page Installing internal USB flash drives Page DDR3L-SDRAM SODIMMs Installing additional memorySODIMMs Populating Sodimm sockets Installing SODIMMsPage Page Page Page Page Installing a half-height PCI-Express 2.0 card Page Page Hood sensor SecurityCable lock Mounting the thin client Page Page Supported mounting options Dimensions SpecificationsPower Output maximum Removing and replacing the battery Page Page Page Routine thin client care Thin client operationSupported orientations Appendix C Thin client operation Non-supported orientation Grounding methods Electrostatic dischargePreventing electrostatic damage Shipping information Important service repair informationShipping preparation Removing the solid state drive flash memoryPage Page Keyboard IndexSSD

Related manuals

Manual 106 pages 35.98 Kb