Sterling STT 500 Temperature Measurement Drying Heater Defective, Safety Switch Drying Heater

Page 43

Dehumidified Air Dryer

Temperature Measurement Drying Heater Defective

Check cables and sensor.

Check the power supply.

Short circuit check.

Excess Temperature Drying Heater

The drying temperature is too high.

Check the safety temperature limiter.

Sterling Service.

Insufficient Temperature Drying Heater

The drying temperature is too low.

Check the drying heater.

Safety Switch Drying Heater

Check the heater.

Check the fuses.

Short circuit check of the heater.

Temperature Measurement Heater Defective Hopper X

(X = number of the drying hopper) Check cables and sensor.

Check the power supply.

Short circuit check.

Excess Temperature Heater Hopper X

(X = number of the drying hopper)

The temperature of the hopper heater is too high.

Check the safety temperature limiter.

Sterling Service.

Insufficient Temperature Heater Hopper X

(X = number of the drying hopper)

The temperature of the hopper heater is too low.

Check the hopper heater.

Safety Switch Heater Hopper X

(X = number of the drying hopper) Check the heater.

Check the fuses.

Short circuit check of the heater.

SM2-620

Error and error correction 4-8

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Sterling Material Processing Parts and Service Department Edition 04/02 Order confirmation number STT Sterling Material ProcessingSTT Table of Contents Transport, Assembly and Storage Electrical manual Dehumidified Air Dryer General InformationGeneral Information Dehumidified Air Dryer Legal basis Dehumidified Air Dryer Explanations and informationFields of applications Safety instructions Safety instructionsGeneral Dehumidified Air Dryer For your safetyOperation AssemblyMaintenance Dehumidified Air Dryer For the safety of the devices Start-up Start-upKey assignment STT Control systemIndicator lamp messages STT Flow chartOperation statuses STT Switching on the dryerSTT Viewing the software-version PasswordsLogout LoginEdit Dryer on/off Timer on/offSTT Basic parameters Turning the devices on/offSTT Dew point max STT Entering dryer valuesRegeneration Heater Act Used air ActReturn air cooler Act Return air cooler TargetHopper entry X Target STT Entering hopper valuesHopper entry X Act Target % = C F GranulesGranules Act. C STT Observing processing status Valve block moved in/moved out/errorDate STT Setting date and timeTime Contrast STT Viewing/changing language and contrastLanguage Parameters STT Changing parametersSelect Parameters Run on time drying blower -- 300 secXX on 0000 OFF 0000 XX = day Mo-Su STT Setting the timerExample Select Main menu STT Starting continuous operationXX h STT Viewing system runtimeSelect System runtime System runtimeSTT Switching the dryer off Error and error correction Error and error correctionLED Alarm View Delete NumberTotal messages Waiting messagesOverflow warning On/Off OverflowSafety Switch Drying Blower Has Been Actuated Main Switch is OffSafety Temperature Limiter has been Activated Safety Switch Regeneration Blower Has Been ActuatedSafety Switch Regeneration Heater Has Been Actuated Temperature Measurement Regeneration Heater DefectiveExcess Temperature Regeneration Heater Insufficient Temperature Regeneration HeaterSafety Switch Drying Heater Temperature Measurement Drying Heater DefectiveExcess Temperature Drying Heater Insufficient Temperature Drying HeaterExcess Temperature Granules Hopper Temperature Measurement Granules Defective HopperValve Error Hopper Maintenance MaintenanceSTT STT Maintenance intervals STT Cleaning/renewing the air filters Return air filter Regeneration air filter Filter of the electrical cabinet STT Tensioning the V-belts Blower regeneration heater / Blower drying heater Disposing of the drying agent Servicing the accessoriesHigh-pressure blowers with frequency converter operation STT Changing the battery of the control system STT STT Resetting the control values Functional description Functional descriptionSTT Dryer Dew point dependent regeneration switch optionalSTT Drying hopper optional STT Return air cooler Automatic motor flaps optional STT Hopper heaters optionalConnection to a pneumatic conveying system optional Transport, Assembly and Storage Transport, Assembly and StorageWith a fork lift truck Dehumidified Air Dryer Transport and PackingWith a workshop crane Storage Dehumidified Air Dryer AssemblyAssembly instructions Assembly instructionsConnection of the air coolers Dehumidified Air Dryer Electrical connection Optional Equipment Technical DataTechnical Data Basic EquipmentSM2-620 All dimensions are in mm.in. Subject to alteration Dimension sheet Spare parts list Spare parts listPos. ID-number Description STT 83986 Moisture sensor Flaps optional Switching Cabinet and Operating UnitAccessories Return air coler optionalElectrical manual Electrical manualAccessories AccessoriesAccessories Entering values on the OP 7 Entering Values Entering Numerical Values Entering Alphanumeric Values Step Procedure Entering Symbolic Values Accessories Flap control with Fuzzy-Logic Control unit flap Flap control with Fuzzy-Logic

STT 500 specifications

The Sterling STT 500 stands out as a versatile and powerful tool designed for professionals in various industries, such as construction, manufacturing, and automotive. This innovative machine integrates advanced technologies and a range of features to enhance performance and user experience.

One of the key attributes of the Sterling STT 500 is its robust engine. Powered by a high-efficiency motor, it delivers impressive torque and power output, allowing it to handle heavy-duty tasks with ease. This machine can operate under demanding conditions, making it suitable for both indoor and outdoor applications.

The STT 500 boasts a user-friendly interface that includes an intuitive control panel. This feature allows operators to easily manage the machine's settings and monitor its performance in real-time. The clear digital display provides essential information, including power levels, operating modes, and maintenance alerts, ensuring that users can perform their tasks effectively and efficiently.

In terms of safety, the Sterling STT 500 is equipped with multiple protective features. This includes emergency shut-off systems and overload protection, which safeguard both the machine and the operator during operation. Additionally, its ergonomic design minimizes physical strain on users, contributing to a safer working environment.

The STT 500 also highlights its advanced connectivity options. With built-in Bluetooth and Wi-Fi capabilities, users can sync the machine with their devices for seamless data transfer and remote monitoring. This feature enables businesses to track machine performance, schedule maintenance, and optimize operations.

Durability is another hallmark of the Sterling STT 500. Constructed with high-quality materials, it is engineered to withstand the rigors of daily use. Its rugged chassis and protective casing ensure longevity, making it a valuable investment for any company looking to enhance their productivity.

The machine’s versatility is further augmented by various accessories and attachments that can be utilized for different applications. Whether it’s drilling, cutting, or grinding, the STT 500 can be tailored to meet diverse operational needs, allowing users to maximize their workflow.

In conclusion, the Sterling STT 500 is an exemplary choice for those seeking a powerful, efficient, and durable tool for their professional tasks. With its advanced technology, user-centric design, and safety features, it continues to meet and exceed the expectations of users across multiple industries.
Top Page Image Contents