Bottom cover
Description | Spare part number |
|
|
Bottom cover for use in: |
|
|
|
Red models with a 3 cell battery | |
|
|
Red models with a 2 cell battery | |
|
|
Silver models with a 3 cell battery | |
|
|
Silver models with a 2 cell battery | |
|
|
Rubber Kit (includes rear feet) | |
|
|
Before removing the bottom cover, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
Remove the bottom cover:
1.Position the computer
2.Pry the two rear rubber feet off the bottom cover (1).
3.Remove the two Phillips PM2.5×8.0 screws (2) that secure the bottom cover to the computer.
28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts