USB/audio board
Description | Spare part number |
|
|
USB/audio board (includes cable) | |
|
|
Before removing the USB/audio board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the bottom cover (see Bottom cover on page 28).
To remove the USB/audio board:
1.Position the bottom cover
2.Remove the Phillips PM2.0×3.0 screw (1).
3.Lift up on the rear of the board and lift the board off the bottom cover (2).
Reverse this procedure to install the USB/audio board.
Component replacement procedures 31