Sterling STT 160 manual STT 110 / STT Setting the Drying Temperature

Page 19

STT 110 / STT 160

3.2.2. Setting the Drying Temperature

Turn the release switches “Hopper” (ST1, ST2) at “I” position.

For each drying hopper, set the required drying temperature (= desired value) by means of the re- spective thermo regulator.

Check whether the set drying temperature is appropriate for the materials which have been filled in.

Observe the instructions of the material manufacturer.

After the first filling, process the material only after the retention period is over. Observe the instructions of the material manufacturer.

Press the “PGM” key.

By means of the arrow keys select the desired value for the drying temperature.

After 2 seconds the display flashes and the value is stored.

Press the “EXIT” key (the setpoint value and the actual value of the drying temperature are displayed).

EXIT

F

After a change of materials, immediately check and correct the set drying temperature.

SM2-605

Start up 3-5

Image 19
Contents Sterling Material Processing Operating Instructions Dehumidified air dryer STTEdition 04/02 STT 110 / STT Sterling Material ProcessingSTT 110 / STT Table of contents Spare parts list Electrical manual Transport, Assembly and StorageAssembly instructions Technical DataGeneral Information General InformationSTT 110 / STT STT 110 / STT Legal basis CTT 110 / CTT Explanations and informationFields of applications Safety instructions Safety instructionsGeneral STT 110 / STT For your safetyOperation AssemblyMaintenance STT 110 / STT For the safety of the devices Start up Start upSTT 110 / STT Initial Operation Switching on the DryerFor operation with timer clock optional For operation without timer clockExit STT 110 / STT Continuous Operation Switching the Dryer onSTT 110 / STT Setting the Drying Temperature Optimizing the thermo regulator ExitSTT 110 / STT Switching the Dryer off Error and error correction Error and error correctionRegeneration heater Following errors can lead to an alarm BlowerHopper heater Maintenance MaintenanceSTT 110 / STT STT 110 / STT Maintenance schedule STT 110 / STT Cleaning or Replacing the Air Filter STT 110 / STT STT 110 / STT Cleaning or Replacing the Return Air FilterSTT 110 / STT Disposing of Drying Agents STT 110 / STT Cleaning the Drying Hopper STT 110 / STT ST 60 ST Functional description Functional descriptionSTT 110 / STT General Information STT 110 / STT STT 110 / STT STT 110 / STT Drying Hopper Optional STT 110 / STT Hopper Heater 180Return Air Cooler Optional Transport, Assembly and Storage Transport, Assembly and StorageSTT 110 / STT Tansport and Packing Storage STT 110 / STT AssemblyAssembly instructions Assembly instructionsGrounding the equipment against electrostatic charging STT 110 / STT Electrical Connection STT 110 / STT Connection of Return Air Cooler Optional Return Air Cooler Technical DataTechnical Data STTSTT 110 / STT STT 110 / STT Dimension Sheet Spare parts list Spare parts listDescription STT 110 / STT Pos ID-numberReturn air cooler optional Operating unit Pos ID-number Description Control unit Electrical manual Electrical manualAccessories AccessoriesCode Basic setting thermo regulatorParameter Parameter set
Related manuals
Manual 58 pages 20.61 Kb