HP 640n Print Server manual Frame Type, EN8023, ENII, EN8022, and Ensnap Frame, AppleTalk Enable

Table A-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
IPX/SPX	Enable		Off (default): Disable the IPX/SPX protocol.
			On: Enable the IPX/SPX protocol.
	Frame Type		Selects the frame-type setting for your network.
			Auto: Automatically sets and limits the frame type to
			the first one detected.
			EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
			type selections for Ethernet networks
AppleTalk	Enable		Off (default): Disable the AppleTalk protocol.
			On: Enable the AppleTalk protocol.
DLC/LLC	Enable		Off (default): Disable the DLC/LLC protocol.
			On: Enable the DLC/LLC protocol.
Security	Print Sec Page		Yes: Prints a page that contains the current IPsec
			security settings on the HP Jetdirect print server.
			No (default): A security settings page is not printed.
Secure Web			For configuration management, specify whether the
			embedded Web server will accept communications
			using HTTPS (Secure HTTP) only, or both HTTP and
			HTTPS.
			HTTPS Required: For secure, encrypted
			communications, only HTTPS access is accepted.
			The print server will appear as a secure site.
			HTTP/HTTPS optional: Access using either HTTP or
			HTTPS is permitted.
			NOTE: The factory default setting depends on the
			print server model.
IPSEC or Firewall			NOTE: IPSEC will appear on the menu for both
			IPsec and Firewall status.
			Specify the IPsec or Firewall status on the print
			server.
			Keep: IPsec/Firewall status remains the same as
			currently configured.
			Disable: IPsec/Firewall operation on the print server
			is disabled.
Reset Security			Specify whether the current security settings on the
			print server will be saved or reset to factory defaults.
			No (default): The current security settings are
			maintained.
			Yes: Security settings are reset to factory defaults.

26 Appendix A HP Jetdirect EIO Control Panel Menus ENWW