Maintenance & Service Guide
Presario 1800 Series
Models: 1805 and 1810
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Cables and Connectors
Most cables used throughout the unit are ribbon cables. Cables must be handled with extreme care to avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal from the connector. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing the cables, and ensure that the cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced.
Cables
Use the following precautions when handling cables to avoid damage to the cable or computer:
●Always handle cables by their connectors.
●Avoid bending, twisting, or pulling on the cables.
●Apply minimum required force when seating or unseating the cables from their connectors.
●Place the cables in such a manner that they cannot be caught or snagged by parts being removed or replaced.
●Handle flex cables with extreme care; they can tear easily.
CAUTION: When serving these computers, ensure that cables are placed in their proper location during the reassembly process. Improper cable placement can cause severe damage to the unit.
Select the desired illustration.
Removing a Cable from a ZIF Connector.
The ribbon cable position for the
The ribbon cable position for the CD or DVD drive.
The ribbon cable position for the diskette drive.
The cable position for the speaker assembly.
Plastic Parts
Plastic parts can be damaged by the use of excessive force during disassembly and reassembly. When handling the plastic parts, use care. Apply pressure only at the points designated in the maintenance instructions.
Back to Top of Page
Return to Removal & Replacement Procedures