Maintenance & Service Guide
Presario 1800 Series
Models: 1805 and 1810
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Battery Charger Board
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
To remove the battery charger board, complete the following steps:
1.Prepare the computer for disassembly.
2.Remove the palmrest cover with touch pad.
3.Remove the keyboard.
4.Remove the hard drive.
5.Remove the stiffener bracket.
6.Remove screw from the battery charger board, unplug the board from the connector on the system board, and lift out of the chassis.
To replace the battery charger board, reverse the previous procedures.
When replacing the battery charger board, ensure
NOTE: the pins are aligned with the connector on the system board.