Maintenance & Service Guide
Presario 1800 Series
Models: 1805 and 1810
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Fan Assembly
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
To remove the fan assembly, complete the following steps:
1.Prepare the computer for disassembly.
2.Remove the palmrest cover with touch pad.
3.Remove the keyboard.
4.Remove the heatspreader.
5.Remove the display panel assembly.
6.Remove the Upper CPU cover.
7.Disconnect the fan cable from the connector on the system board. Pull the fan from the chassis slot.
To remove the fan gasket, complete the following step:
Pull the gasket from the fan.
Fan Assembly |
|
| Replace | |
|
|
| the fan | |
| ||||
Audio Board | ||||
|
| gasket, | ||
|
|
| ||
| ||||
System Board | ||||
|
| place the | ||
|
|
| ||
|
|
| fan at a | |
Memory | ||||
Module |
| IMPORTANT: | 15 degree | |
|
| angle, | ||
| ||||
|
|
| and push | |
|
|
| forward | |
|
|
| to replace | |
|
|
| the fan | |
|
|
| assembly. | |
| To replace the fan | |||
| assembly, reverse the | |||
| previous procedures. | |||