Maintenance & Service Guide
Presario 1800 Series
Models: 1805 and 1810
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Speaker Assembly
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Modem
Processor
Status Panel
Interface
Board
Hard Drives
Battery
Charger Board
CD or DVD
Drive
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
Audio Board
System Board
Memory
Module
To remove the speaker assembly, complete the following steps:
1.Prepare the computer for disassembly.
2.Remove the palmrest cover with touch pad.
3.Remove the keyboard.
4.Remove the heatspreader.
5.Remove the hard drive.
6.Remove the stiffener bracket.
7.Remove the display panel assembly.
8.Remove the CD drive.
9.Disconnect the speaker cables from the system board and remove the speaker assembly from the chassis.
The speaker cables must be properly routed when replacing the speaker assembly.
Place the cables in such
NOTE: a manner that they cannot
be caught or snagged by
screws.
For more information refer to the section on speaker
assembly cable position.
To replace the speaker assembly, reverse the previous procedures.