HP 1805 manual Removing the Keyboard, Prepare the computer for disassembly

Page 46

Maintenance & Service Guide

Presario 1800 Series

Models: 1805 and 1810

Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations

Removing the Keyboard

Electrostatic

Discharge

Service

Considerations

Cables and

Connectors

Preparing the

Computer for

Disassembly

Battery Pack

Palmrest

Cover with

Touch Pad

Keyboard

Heatspreader

Modem

Processor

Status Panel

Interface

Board

Hard Drives

Battery

Charger Board

CD or DVD

Drive

Display Panel

Assembly

Upper CPU

Cover

Speaker

Assembly

Diskette Drive

Fan Assembly

Audio Board

System Board

Memory

Module

To remove the keyboard, complete the following steps:

1.Prepare the computer for disassembly.

2.Remove the palmrest cover with touch pad.

3.Gently lift up the front of the keyboard and disconnect the flex cable from the ZIF connector on the system board.

To remove a cable from a ZIF connector, lift both corners of the ZIF connector and slide simultaneously with constant light force.

NOTE: Then remove the cable. Refer to the section on Cables and

Connectors for

more information on removing a cable from the ZIF connector.

Next Step

Image 46
Contents Maintenance & Service Guide Maintenance & Service Guide Symbols PrefaceProduct Description Port ReplicatorTroubleshooting Follow the Preliminary Steps Run the Power-OnSelf-Test PostIllustrated Parts Catalog Removal and Replacement Procedures Serial Number LocationSpecifications Connector Pin Assignments Battery Pack Operating Time Compaq Presario 1800 Series Portable Computer Models Models and FeaturesModel Controls and Lights Front of UnitLeft Side Components Port ReplicatorRight Side Components Bottom of Unit Rear Connectors Port Replicator Power Management for Windows Preliminary Steps Run Computer CheckupPower-On Self Test Post Running PostClearing the Power-on Password Computer Checkup Test Compaq DiagnosticsView System Information Inspect Contacting Compaq Support Shipping PreparationDiagnostic Error Codes ProceduresTroubleshooting Without Diagnostics Before Replacing PartsSolving Minor Problems Solving Printer Problems Solving PC Card ProblemsSolving Power Problems Solving Touch Pad/Pointing Device ProblemsSystem Unit United States 330981-001Boards Modem, 56.0 Kbps Data/Fax w/oDescription Mass Storage Devices Miscellaneous Cables Kit Miscellaneous Cables Kit Spare Part NumberDescription Modem Cables Spare Part NumberMiscellaneous Hardware and Plastics Kit Miscellaneous Hardware and Plastics Kit Spare Part NumberMiscellaneous Parts Quick Reference Guide Description Spare Part Number Quick Restore CDDocumentation and Software QuickFind Part Number Suffix MonthElectrostatic Discharge Generating StaticService Considerations Select the desired illustration Cables and ConnectorsCables Plastic PartsZIF Connectors Maintenance & Service Guide Ribbon cable position for the CD drive Ribbon cable position for the diskette drive Back to Cables and Connectors Preparing the Computer for Disassembly Preparing the Computer for DisassemblyPrepare the computer for disassembly Removing the KeyboardRemoving the Heatspreader Removing the Modem Return to Removal Replacement Procedures Removing the Processor Replace the processor bracket Removing the Status Panel Removing the Interface Board with Header Audio BoardNext Step When replacing interface board, ensure both Interface Board Components Removing the 3.2-GB, 4.0-GB, or 6.4-GB Hard Drive Maintenance & Service Guide Bracket, reverse the previous procedures Removing the Battery Charger Board Removing the CD or DVD Drive Disconnect the CD or DVD drive cable from the system board Removing the Display Panel Assembly Removing the Upper CPU Cover Removing the Speaker Assembly Removing the Diskette Drive Maintenance & Service Guide Return to Removal Replacement Procedures Removing the Fan Assembly Removing the Audio Board To replace the audio board, reverse the previous procedures Removing the System Board Remove five standoffs from the system board Remove three screws from the system board Return to Removal & Replacement Procedures Removing the Memory Module Return to Removal Replacement Procedures
Related manuals
Manual 8 pages 26.72 Kb