Thermo Products OH5-85DXE operation manual Customer

All installations and services must be performed by qualified service personnel.

COMBUSTION AND EFFICIENCY TESTING FOR THERMO PRIDE OIL FIRED CENTRAL FURNACES.

Complete this form for each Thermo Pride furnace installed. Read instruction manual carefully before making tests. Retain this form with furnace.

CUSTOMER	NAME
	ADDRESS
	CITY, STATE
HEATING	BURNER MODEL NO.		BLAST TUBE LGTH.				AIR SHUTTER OPENING
						INS.				% OF MAX. (EST)
SYSTEM
	COMBUSTION CHAMBER			CONDITION		MATERIAL			FURNACE MODEL
	TYPE OF VENTING SYSTEM
		MASONRY	METAL			SIDEWALL				MASONRY
		CHIMNEY	CHIMNEY			POWER VENTER				CHIMNEY
		METAL	MASONRY CHIMNEY							W/INDUCER
		CHIMNEY	W/METAL LINER
		W/INDUCER
	FUEL LINE FILTER		DRAFT CONTROL					FURNACE SERIAL NUMBER
COMBUSTION			INITIAL		SERVICE			SERVICE		SERVICE
			INSTALLATION
TESTS
(Operate burner	CO2 in stack pipe
at least 10	Draft Over-fire
minutes before	Draft in stack pipe
starting tests.)	Smoke number
	Gross stack temp.
	Furnace room temp.
	Net stack temp.
	(Gross stack minus
	furnace room temp.)
	Efficiency
	Nozzle size and spray
	Oil pump pressure
	Operation of Controls
	Burner Safety Controls
	Check for oil leaks
	Tests taken by
	Date
	NOTES:
	INSTALLER NAME & ADDRESS

11