SmartShare® User Manual
External Servers (optional)
NTP Server
If the system time must be synchronized with an external NTP server, its host name or IP address can be set.
The default configuration is: (empty)
LAN (Local Area Network) configuration menu
Network Setup
The router name must be set. Optionally a domain name can be configured. This information is used by the
The default router name is: router
The default domain name is: local
IP Address Range
The IP address range must be set. This information is used to distribute the bandwidth among the active users and by the
The default IP address range is:
Local DNS Servers (optional)
If there are any DNS servers on the LAN, their IP addresses can be set. This information (in addition to the DNS server information from the WAN) is used by the
The default configuration is: (empty)
Local NTP Server (optional)
If there is an NTP server on the LAN, its IP address can be set. This information is used by the
The default configuration is: (empty)
Built-in DHCP Server
If enabled, the
The default configuration is: Enabled
– 10 –