SmartShare® User Manual
Managers configuration menu
Multiple users can manage and configure the SmartShare.
The following can be configured for each manager:
•User Name (required).
•Password. Password for access to the web management interface.
•Community. SNMP Community for access to the SNMP agent. If not set, access to the SNMP agent will not be allowed.
•First and last IP address (optional). If set, the manager is only allowed management access if he connects from a PC within the specified IP address range.
•Manager Level. This determines how much the manager has access to do.
The following Manager Levels are available:
•Blocked. No access.
•User. Access to the Status page only.
•Installer. Full access.
The factory default administrator user name is: admin and password: admin
The factory default community is: (empty)
Logout menu
Log out and return to the login page.
Using the Serial Port
The serial port can be used with any terminal emulator, such as Hyperterm or Tera Term Pro, as a fallback solution if the LAN connection has been lost.
The speed is: 115200 8N1 (115200 baud, 8 bits, No parity, 1 stop bit).
The following commands are available:
•? – Show help.
•info – Show configuration information.
•reboot – Reboot the SmartShare.
•restore – Restore configuration to factory default.
•license – Show hardware MAC and license ID.
•license=xxxxx – Install new license key.
•password bypass – Enable factory default administrator user name: admin and
password: admin for 5 minutes.
The serial port is not password protected.
– 16 –