HP Ultra320 A7173A manual Example, Scsi

Page 34

Example

3-5

Typical List of Available SCSI Controllers

Available SCSI Ultra320

Controllers

 

 

 

 

SCSI

Slot

Seg

Bus

Dev

Channel

------------------------------------------------------------------

XX

1

00

20

01

Ch A

Ch B

 

 

SCSI Ultra320 Core-IO

 

 

01

2

00

80

01

Ch A

Ch B

 

 

SCSI Ultra320 Dual-Channel PCI-X Adapter

------------------------------------------------------------------

Back

1Core-IO SCSI controller, indicated by XX in the Slot column and the description

SCSI Ultra320 Core-IO.

2A7173A SCSI Controller, indicated by a numeric value in the Slot column and the description SCSI Ultra320 Dual-Channel PCI-X Adapter.

To return to the main menu, use Tab to highlight Back, then press Enter.

To configure a SCSI channel, use the Arrow keys (Left, Right, Up, and Down) to highlight Channel A or Channel B of a SCSI controller, then press Enter. An information screen for the selected SCSI channel displays. For example:

LSI Logic

Host Bus

Adapters

 

 

 

 

 

 

 

Adapter

PCI

PCI

PCI

RAID

FW Revision

Pro-

LSI

 

RAID

IRQ

 

 

Bus

Dev

Fnc

Alert

 

duct

Control

Status

 

<53C1030

80

02

00>

-----

1.03.35.65

IT

Enabled

 

---------

0 *

NOTE: Although the first line in the display reads “LSI Logic Host Bus Adapters,” if you select a SCSI channel on a SCSI controller that is Core-IO, as opposed to being located on an A7173A host bus adapter, information for the Core-IO SCSI channel will appear in this screen.

Use the Arrow keys (Left or Right) to highlight the SCSI Controller , the FW Revision, or one of the other items, then press Enter for more details and options.

NOTE: The response may not be instantaneous, depending on the terminal you are using. Allow sufficient time for the EFI utility to respond before pressing any other keys.

Example 3-6shows the Adapter Properties screen for a typical A7173A controller:

34 Configuring the A7173A Adapter

Image 34
Contents HP-UX 11i v1, 11i v2, and 11i Copyright 2007 Hewlett-Packard Development Company, L.P Table of Contents Scsi Sense Codes Glossary Index Page HP-UX Release Name and Release Identifier About This DocumentIntended Audience Publishing HistoryTypographical Conventions What’s in This DocumentNew and Changed Documentation in This Edition Document OrganizationHP Welcomes Your Comments Via email netinfofeedback@cup.hp.comPage HP A7173A Adapter Overview About the A7173A AdapterPage Installing the A7173A Adapter Installation OverviewLocating A7173A Adapter Software Installing A7173A Adapter SoftwareFiles Contained in the scsiU320-00 Bundle Processor Dependent Code PDC on HP 9000 Systems System FirmwareExtensible Firmware Interface EFI on HP Integrity Systems Offline Installation Installing A7173A Adapter HardwareOnline Installation Connecting Scsi Peripheral Devices Important Rules For Connecting Scsi DevicesConnecting External Devices Connecting Internal DevicesIdentifying Compatible Scsi Cables # ioscan -fnkd mpt Confirming the A7173A Adapter Firmware Version# mptutil /dev/mpt8 Verifying the Installation PCI-X Dual Channel ULTRA320 Scsi Adapter# mptconfig /dev/mpt8 Adding Multi-Initiator SupportPage Configuring the A7173A Adapter Setting the Scsi ParametersAbout Scsi IDs Setting Scsi IDs OfflineSetting Scsi IDs Online About the Maximum Data Transfer RateSetting the Maximum Data Transfer Rate Online Setting the Maximum Data Transfer Rate OfflineAbout Bus Width Setting the Bus Width Online Setting the Bus Width OfflineAbout Auto-Termination Configuration Worksheet Scsi ID SettingsConfirming the PDC Version Setting and Confirming Scsi Parameters OfflineUsing the BCH Menus on HP 9000 Systems Example 3-1 The BCH Main MenuDetermining Path, Bus, and Slot Information Setting and Confirming the Data Transfer Rate Example 3-2 I/O Interface InformationExample 3-3 Typical BCH scsi Command Help Screen Example 3-4 Typical scsi rate Command OutputDownloading the EFI Driver, EFI Utility, and Firmware Using the EFI Utility on HP Integrity SystemsStarting the pscsi Utility Configuring the Scsi Ultra320 Interface Example ScsiConfiguring Scsi Devices Example 3-6 Typical Adapter Properties ScreenDownloading and Installing a Firmware Image Example 3-7 Typical Device Properties ScreenExample Selecting a Controller for Firmware Update Example 3-9 Selecting a Firmware Image to DownloadUpdating the EFI Driver Exiting the EFI Utility Setting and Confirming Scsi Parameters OnlineAdvanced Operations Display Vital Product Data VPD Example 3-10 Typical Vital Product Data ScreenUsing mptconfig for Online Configuration # mptconfigExample 3-11 Typical ioscan -kfn Command Output # mptconfig /dev/mpt14Setting the Scsi ID Online # mptconfig -i 5 /dev/mpt14Using Common mptconfig Command Line Options # mptconfig -d /dev/mpt14Using the A7173A Adapter as a Boot Device Setting Scsi Parameters to Default ValuesConfiguring LUN OfflinePerformance Tuning HP A7173A Administration and ManagementOnline Replacement of the A7173A Adapter Verify or Update A7173A Adapter Firmware On HP 9000 Systems Using mptutil to Verify or Update A7173A Adapter FirmwareExample 4-1 Typical ioscan -fnkd Command Output Example 4-2 Typical mptutil devicefile Command Output # mptutil /dev/mpt14Example 4-3 Using mptutil to Update the Scsi Firmware Online # mptutil -d /tmp/fw1.03.35.69IO /dev/mpt14Page Troubleshooting General Troubleshooting ProcedureCreating Missing Device Files A7173A Adapter Is Claimed, But There Is No IOConfirm Scsi Parameters Problems Detected By Domain ValidationNo Target Devices are Displayed in the ioscan Output Domain ValidationExample 5-2 Typical Domain Validation syslog Entry Domain Validation Fallback LevelsUsing the mptutil Command Example 5-3 Typical ioscan -fnkd mpt Command Output # mptutilChannel # mptutil -c /dev/mpt14 # mptutil -t tgtreset 1 /dev/mpt14 Example 5-5 Updating A7173A Firmware OnlineDevice Statistics and Trace Information # mptutil -t busreset /dev/mpt14# mptutil -u /tmp/fw1.03.35.69IO /dev/mpt14 Port Information Using Support Tools Manager STMHP Event Monitoring Services EMS # mptutil -R /dev/mpt14HP Offline Diagnostics Environment ODE PCI Error RecoveryContacting Your Hewlett-Packard Representative Uname -rPage Scsi Sense Codes Example A-1 Typical Scsi Error MessageTable A-1 Scsi Status Codes complete list Table A-2 Scsi Sense Keys complete list Logical unit not ready, cause not reportable Logical unit not supported Medium format corrupted Erase failure Specifications Table B-1 A7173A Adapter Features and SpecificationsHP part number for easy identification when ioscan is used FCC Statement For U.S.A. Only Regulatory InformationRegulatory Statements IEC Statement WorldwideSpécification ATI Classe a France Vcci Statement JapanDeclaration of Conformity Figure C-1 A7173A Adapter Declaration of ConformityPage Glossary BitEeprom Nvram Vcci Wide Scsi Page Index Determining adapter’s pathIndex Page J6373-90030

Ultra320 A7173A specifications

The HP Ultra320 A7173A is a high-performance Storage Area Network (SAN) component, widely recognized for its reliability and efficiency in data storage solutions. Designed to support the demands of enterprise-level applications, this SCSI (Small Computer System Interface) controller excels in providing fast and reliable data transfer, making it a preferred choice for businesses that require robust storage solutions.

One of the standout features of the A7173A is its ultra-fast data transfer rate. It is capable of achieving speeds of up to 320 MB/s, which is made possible through the Ultra320 SCSI technology. This speed enhancement is crucial for applications requiring quick access to large volumes of data, thus improving overall system performance. The controller maintains compatibility with previous SCSI standards, allowing for interoperability in diverse environments and ensuring that organizations can leverage their existing infrastructure.

The A7173A is built on advanced technologies that enhance its performance and reliability. These include intelligent data buffering and error correction mechanisms, which minimize the likelihood of data loss and improve the integrity of information during transfers. Additionally, the controller features multiple device connections, accommodating up to 15 devices on a single chain. This scalability offers flexibility in expanding storage solutions based on organizational needs.

Another significant characteristic of the HP Ultra320 A7173A is its support for a wide range of operating systems. The controller is versatile, allowing it to integrate seamlessly with numerous enterprise platforms. This broad compatibility ensures that IT departments can deploy the A7173A within their existing environments without major adjustments or additional costs.

Moreover, the A7173A comes with comprehensive management features, enabling administrators to monitor and optimize storage performance effectively. These features help in anticipating issues before they escalate, thereby minimizing downtime and facilitating smoother operations.

In essence, the HP Ultra320 A7173A is a comprehensive SAN solution that offers exceptional speed, reliability, and scalability. Its advanced technologies and versatile compatibility make it an ideal component for organizations looking to optimize their data storage infrastructure while ensuring robust performance across diverse applications. Investing in the A7173A can lead to marked improvements in data management, ultimately contributing to business efficiency and continuity.