HP Ultra320 A7173A manual Example Selecting a Controller for Firmware Update

Page 37

Example

3-8

Selecting a Controller for Firmware Update

 

Available SCSI Ultra320

Controllers

 

 

 

 

 

 

Flash

SCSI

EFI

Slot

Seg

Bus

Dev

Part

Firmware

Driver

-------------------------------------------------------------------

XX

00

20

01

No

 

1.03.06.00

1.02.09.00

 

SCSI Ultra320 Core-IO

 

 

 

 

01

00

80

01

Yes

1.03.35.65

1.04.02.00

 

SCSI Ultra320 Dual-Channel

PCI-X Adapter

 

------------------------------------------------------------------

Select All

Back

The Flash Part column indicates whether the EFI utility can update the firmware of a SCSI controller. A value of No in this column indicates the EFI utility cannot be used to update firmware for that controller. In Example 3-8, the first SCSI controller listed is a Core-IO controller, as indicated by its description and the value of XX in the Slot column. You cannot use the EFI utility to update the firmware for Core-IO SCSI controllers. The EFI utility can only perform firmware updates on SCSI controllers that are attached to host bus adapters installed in PCI slots.

The SCSI Firmware and EFI Driver columns display the versions of the SCSI firmware and EFI driver that are currently running on the controller.

To update the SCSI firmware or EFI driver on an A7173A adapter, use the arrow keys to highlight the SCSI controller attached to the A7173A adapter that you want to update, then press Enter. The EFI utility will display a directory listing from which you can select the firmware image file, such as in Example 3-9:

Example 3-9 Selecting a Firmware Image to Download

Select Firmware Image

-----------------------------------------------------------------------

<DIR> ..

1

 

 

 

 

it_1030.fw

Ultra320

SCSI

Firmware 1.03.35.65

lsimpt.rom

2

Ultra320

EFI

Driver

1.04.02.00

-----------------------------------------------------------------------

Back

1 An adapter firmware file 2 An EFI driver file Updating the Adapter Firmware

If you select an Ultra320 SCSI Firmware file (such as it_1030.fw in Example 3-9), then press Enter, a confirmation screen appears. For example

You are about to install SCSI Firmware version 1.03.35.65

Do you want to proceed? (y/n)

If you press y, a status screen appears, displaying the progress of the operation. For example:

Installing SCSI Firmware Image for Seg:00 Bus:80 Dev:01

Percentage Complete - 100%

Re-initializing controller...

This operation may take up to one minute.

Firmware Image Installation successful for Seg:00 Bus:80 Dev:01 Updated Seg:00 Bus:80 Dev:01 to SCSI Firmware Version 1.03.35.65

Press any key to continue

Press any key to return to the main menu.

Setting and Confirming SCSI Parameters Offline

37

Image 37
Contents HP-UX 11i v1, 11i v2, and 11i Copyright 2007 Hewlett-Packard Development Company, L.P Table of Contents Scsi Sense Codes Glossary Index Page Intended Audience About This DocumentHP-UX Release Name and Release Identifier Publishing HistoryNew and Changed Documentation in This Edition What’s in This DocumentTypographical Conventions Document OrganizationVia email netinfofeedback@cup.hp.com HP Welcomes Your CommentsPage About the A7173A Adapter HP A7173A Adapter OverviewPage Installation Overview Installing the A7173A AdapterLocating A7173A Adapter Software Installing A7173A Adapter SoftwareFiles Contained in the scsiU320-00 Bundle Processor Dependent Code PDC on HP 9000 Systems System FirmwareExtensible Firmware Interface EFI on HP Integrity Systems Offline Installation Installing A7173A Adapter HardwareOnline Installation Important Rules For Connecting Scsi Devices Connecting Scsi Peripheral DevicesConnecting External Devices Connecting Internal DevicesIdentifying Compatible Scsi Cables # ioscan -fnkd mpt Confirming the A7173A Adapter Firmware Version# mptutil /dev/mpt8 PCI-X Dual Channel ULTRA320 Scsi Adapter Verifying the InstallationAdding Multi-Initiator Support # mptconfig /dev/mpt8Page Setting the Scsi Parameters Configuring the A7173A AdapterSetting Scsi IDs Online Setting Scsi IDs OfflineAbout Scsi IDs About the Maximum Data Transfer RateSetting the Maximum Data Transfer Rate Online Setting the Maximum Data Transfer Rate OfflineAbout Bus Width Setting the Bus Width Online Setting the Bus Width OfflineAbout Auto-Termination Scsi ID Settings Configuration WorksheetUsing the BCH Menus on HP 9000 Systems Setting and Confirming Scsi Parameters OfflineConfirming the PDC Version Example 3-1 The BCH Main MenuDetermining Path, Bus, and Slot Information Example 3-2 I/O Interface Information Setting and Confirming the Data Transfer RateExample 3-4 Typical scsi rate Command Output Example 3-3 Typical BCH scsi Command Help ScreenDownloading the EFI Driver, EFI Utility, and Firmware Using the EFI Utility on HP Integrity SystemsStarting the pscsi Utility Configuring the Scsi Ultra320 Interface Scsi ExampleExample 3-6 Typical Adapter Properties Screen Configuring Scsi DevicesExample 3-7 Typical Device Properties Screen Downloading and Installing a Firmware ImageExample 3-9 Selecting a Firmware Image to Download Example Selecting a Controller for Firmware UpdateUpdating the EFI Driver Advanced Operations Display Vital Product Data VPD Setting and Confirming Scsi Parameters OnlineExiting the EFI Utility Example 3-10 Typical Vital Product Data Screen# mptconfig Using mptconfig for Online Configuration# mptconfig /dev/mpt14 Example 3-11 Typical ioscan -kfn Command Output# mptconfig -i 5 /dev/mpt14 Setting the Scsi ID Online# mptconfig -d /dev/mpt14 Using Common mptconfig Command Line OptionsConfiguring LUN Setting Scsi Parameters to Default ValuesUsing the A7173A Adapter as a Boot Device OfflinePerformance Tuning HP A7173A Administration and ManagementOnline Replacement of the A7173A Adapter Using mptutil to Verify or Update A7173A Adapter Firmware Verify or Update A7173A Adapter Firmware On HP 9000 SystemsExample 4-1 Typical ioscan -fnkd Command Output # mptutil /dev/mpt14 Example 4-2 Typical mptutil devicefile Command Output# mptutil -d /tmp/fw1.03.35.69IO /dev/mpt14 Example 4-3 Using mptutil to Update the Scsi Firmware OnlinePage General Troubleshooting Procedure TroubleshootingA7173A Adapter Is Claimed, But There Is No IO Creating Missing Device FilesNo Target Devices are Displayed in the ioscan Output Problems Detected By Domain ValidationConfirm Scsi Parameters Domain ValidationDomain Validation Fallback Levels Example 5-2 Typical Domain Validation syslog EntryUsing the mptutil Command # mptutil Example 5-3 Typical ioscan -fnkd mpt Command OutputChannel # mptutil -c /dev/mpt14 Example 5-5 Updating A7173A Firmware Online # mptutil -t tgtreset 1 /dev/mpt14Device Statistics and Trace Information # mptutil -t busreset /dev/mpt14# mptutil -u /tmp/fw1.03.35.69IO /dev/mpt14 HP Event Monitoring Services EMS Using Support Tools Manager STMPort Information # mptutil -R /dev/mpt14PCI Error Recovery HP Offline Diagnostics Environment ODEUname -r Contacting Your Hewlett-Packard RepresentativePage Scsi Sense Codes Example A-1 Typical Scsi Error MessageTable A-1 Scsi Status Codes complete list Table A-2 Scsi Sense Keys complete list Logical unit not ready, cause not reportable Logical unit not supported Medium format corrupted Erase failure Table B-1 A7173A Adapter Features and Specifications SpecificationsHP part number for easy identification when ioscan is used Regulatory Statements Regulatory InformationFCC Statement For U.S.A. Only IEC Statement WorldwideVcci Statement Japan Spécification ATI Classe a FranceFigure C-1 A7173A Adapter Declaration of Conformity Declaration of ConformityPage Bit GlossaryEeprom Nvram Vcci Wide Scsi Page Determining adapter’s path IndexIndex Page J6373-90030

Ultra320 A7173A specifications

The HP Ultra320 A7173A is a high-performance Storage Area Network (SAN) component, widely recognized for its reliability and efficiency in data storage solutions. Designed to support the demands of enterprise-level applications, this SCSI (Small Computer System Interface) controller excels in providing fast and reliable data transfer, making it a preferred choice for businesses that require robust storage solutions.

One of the standout features of the A7173A is its ultra-fast data transfer rate. It is capable of achieving speeds of up to 320 MB/s, which is made possible through the Ultra320 SCSI technology. This speed enhancement is crucial for applications requiring quick access to large volumes of data, thus improving overall system performance. The controller maintains compatibility with previous SCSI standards, allowing for interoperability in diverse environments and ensuring that organizations can leverage their existing infrastructure.

The A7173A is built on advanced technologies that enhance its performance and reliability. These include intelligent data buffering and error correction mechanisms, which minimize the likelihood of data loss and improve the integrity of information during transfers. Additionally, the controller features multiple device connections, accommodating up to 15 devices on a single chain. This scalability offers flexibility in expanding storage solutions based on organizational needs.

Another significant characteristic of the HP Ultra320 A7173A is its support for a wide range of operating systems. The controller is versatile, allowing it to integrate seamlessly with numerous enterprise platforms. This broad compatibility ensures that IT departments can deploy the A7173A within their existing environments without major adjustments or additional costs.

Moreover, the A7173A comes with comprehensive management features, enabling administrators to monitor and optimize storage performance effectively. These features help in anticipating issues before they escalate, thereby minimizing downtime and facilitating smoother operations.

In essence, the HP Ultra320 A7173A is a comprehensive SAN solution that offers exceptional speed, reliability, and scalability. Its advanced technologies and versatile compatibility make it an ideal component for organizations looking to optimize their data storage infrastructure while ensuring robust performance across diverse applications. Investing in the A7173A can lead to marked improvements in data management, ultimately contributing to business efficiency and continuity.