HP Ultra320 A7173A Example 4-2 Typical mptutil devicefile Command Output, # mptutil /dev/mpt14

Page 48

Example 4-2 Typical mptutil <device_file> Command Output

#mptutil /dev/mpt14

******************************************************************************

****

 

 

****

****

M P T U T I L S u p p o r t

T o o l

****

****

 

 

****

****

for Ultra320 SCSI

Controller

****

****

 

 

****

****

Version 1.02 : Oct

22 2006

****

****

 

 

****

****

(c) Copyright 2003 Hewlett-Packard Development Company, L.P.

****

****

 

 

****

******************************************************************************

---- ADAPTER INFORMATION -----------------------------------------------------

 

Device File

: /dev/mpt14

Hardware Path

: 1/0/14/0/0

Driver Version

: r11.31/1.02

---- CHIP INFORMATION --------------------------------------------------------

 

Device ID

:

0x0030

Vendor ID

:

0x1000

Revision ID

:

0x8

Subsystem ID

:

0x12c5

Subsystem Vendor ID

:

0x103c

IOC Number

:

0

Max. Devices

:

16

Number of channels

:

2

Driver State

: OPERATIONAL

---- FIRMWARE INFORMATION ----------------------------------------------------

 

SCSI Firmware Version

: 1.03.35.65 IO 1

SCSI Firmware Version (Hex)

: 1.03.23.41 IO

SCSI Firmware Size

:

39968

EFI Driver Version

:

1.05.00.01 2

---- V P D I N F O R M A T I O

N -------------------------------------------

Adapter

:

PCI-X DUAL CHANNEL ULTRA320 SCSI ADAPTER

Part Number

:

A6961-60011

Engineering Code

:

C-4429

Specification

:

PW=15W PCI-X=64BIT,133MHZ

Serial Number

:

P105283605

Manufacturing Date Code

:

C-4429

EFI driver version

:

1.05.00.01

1 Current SCSI (or

2

Current EFI driver

adapter) firmware

 

version.

version

 

 

To determine the recommended firmware version to use the A7173A adapter your system, see the HP Ultra320 SCSI Host Bus Adapter Support Matrix at:

http://docs.hp.com/en/netcom.html#SCSI%20Host%20Bus%20Adapters

You can download adapter firmware from the Business Support Center, at:

http://www.hp.com/go/bizsupport

When you have obtained the A7173A adapter firmware version you need, save it to the temporary directory on your system and proceed to Step 3.

48 HP A7173A Administration and Management

Image 48
Contents HP-UX 11i v1, 11i v2, and 11i Copyright 2007 Hewlett-Packard Development Company, L.P Table of Contents Scsi Sense Codes Glossary Index Page About This Document Intended AudienceHP-UX Release Name and Release Identifier Publishing HistoryWhat’s in This Document New and Changed Documentation in This EditionTypographical Conventions Document OrganizationHP Welcomes Your Comments Via email netinfofeedback@cup.hp.comPage HP A7173A Adapter Overview About the A7173A AdapterPage Installing the A7173A Adapter Installation OverviewInstalling A7173A Adapter Software Locating A7173A Adapter SoftwareFiles Contained in the scsiU320-00 Bundle System Firmware Processor Dependent Code PDC on HP 9000 SystemsExtensible Firmware Interface EFI on HP Integrity Systems Installing A7173A Adapter Hardware Offline InstallationOnline Installation Connecting Scsi Peripheral Devices Important Rules For Connecting Scsi DevicesConnecting Internal Devices Connecting External DevicesIdentifying Compatible Scsi Cables Confirming the A7173A Adapter Firmware Version # ioscan -fnkd mpt# mptutil /dev/mpt8 Verifying the Installation PCI-X Dual Channel ULTRA320 Scsi Adapter# mptconfig /dev/mpt8 Adding Multi-Initiator SupportPage Configuring the A7173A Adapter Setting the Scsi ParametersSetting Scsi IDs Offline Setting Scsi IDs OnlineAbout Scsi IDs About the Maximum Data Transfer RateSetting the Maximum Data Transfer Rate Offline Setting the Maximum Data Transfer Rate OnlineAbout Bus Width Setting the Bus Width Offline Setting the Bus Width OnlineAbout Auto-Termination Configuration Worksheet Scsi ID SettingsSetting and Confirming Scsi Parameters Offline Using the BCH Menus on HP 9000 SystemsConfirming the PDC Version Example 3-1 The BCH Main MenuDetermining Path, Bus, and Slot Information Setting and Confirming the Data Transfer Rate Example 3-2 I/O Interface InformationExample 3-3 Typical BCH scsi Command Help Screen Example 3-4 Typical scsi rate Command OutputUsing the EFI Utility on HP Integrity Systems Downloading the EFI Driver, EFI Utility, and FirmwareStarting the pscsi Utility Configuring the Scsi Ultra320 Interface Example ScsiConfiguring Scsi Devices Example 3-6 Typical Adapter Properties ScreenDownloading and Installing a Firmware Image Example 3-7 Typical Device Properties ScreenExample Selecting a Controller for Firmware Update Example 3-9 Selecting a Firmware Image to DownloadUpdating the EFI Driver Setting and Confirming Scsi Parameters Online Advanced Operations Display Vital Product Data VPDExiting the EFI Utility Example 3-10 Typical Vital Product Data ScreenUsing mptconfig for Online Configuration # mptconfigExample 3-11 Typical ioscan -kfn Command Output # mptconfig /dev/mpt14Setting the Scsi ID Online # mptconfig -i 5 /dev/mpt14Using Common mptconfig Command Line Options # mptconfig -d /dev/mpt14Setting Scsi Parameters to Default Values Configuring LUNUsing the A7173A Adapter as a Boot Device OfflineHP A7173A Administration and Management Performance TuningOnline Replacement of the A7173A Adapter Verify or Update A7173A Adapter Firmware On HP 9000 Systems Using mptutil to Verify or Update A7173A Adapter FirmwareExample 4-1 Typical ioscan -fnkd Command Output Example 4-2 Typical mptutil devicefile Command Output # mptutil /dev/mpt14Example 4-3 Using mptutil to Update the Scsi Firmware Online # mptutil -d /tmp/fw1.03.35.69IO /dev/mpt14Page Troubleshooting General Troubleshooting ProcedureCreating Missing Device Files A7173A Adapter Is Claimed, But There Is No IOProblems Detected By Domain Validation No Target Devices are Displayed in the ioscan OutputConfirm Scsi Parameters Domain ValidationExample 5-2 Typical Domain Validation syslog Entry Domain Validation Fallback LevelsUsing the mptutil Command Example 5-3 Typical ioscan -fnkd mpt Command Output # mptutilChannel # mptutil -c /dev/mpt14 # mptutil -t tgtreset 1 /dev/mpt14 Example 5-5 Updating A7173A Firmware Online# mptutil -t busreset /dev/mpt14 Device Statistics and Trace Information# mptutil -u /tmp/fw1.03.35.69IO /dev/mpt14 Using Support Tools Manager STM HP Event Monitoring Services EMSPort Information # mptutil -R /dev/mpt14HP Offline Diagnostics Environment ODE PCI Error RecoveryContacting Your Hewlett-Packard Representative Uname -rPage Example A-1 Typical Scsi Error Message Scsi Sense CodesTable A-1 Scsi Status Codes complete list Table A-2 Scsi Sense Keys complete list Logical unit not ready, cause not reportable Logical unit not supported Medium format corrupted Erase failure Specifications Table B-1 A7173A Adapter Features and SpecificationsHP part number for easy identification when ioscan is used Regulatory Information Regulatory StatementsFCC Statement For U.S.A. Only IEC Statement WorldwideSpécification ATI Classe a France Vcci Statement JapanDeclaration of Conformity Figure C-1 A7173A Adapter Declaration of ConformityPage Glossary BitEeprom Nvram Vcci Wide Scsi Page Index Determining adapter’s pathIndex Page J6373-90030

Ultra320 A7173A specifications

The HP Ultra320 A7173A is a high-performance Storage Area Network (SAN) component, widely recognized for its reliability and efficiency in data storage solutions. Designed to support the demands of enterprise-level applications, this SCSI (Small Computer System Interface) controller excels in providing fast and reliable data transfer, making it a preferred choice for businesses that require robust storage solutions.

One of the standout features of the A7173A is its ultra-fast data transfer rate. It is capable of achieving speeds of up to 320 MB/s, which is made possible through the Ultra320 SCSI technology. This speed enhancement is crucial for applications requiring quick access to large volumes of data, thus improving overall system performance. The controller maintains compatibility with previous SCSI standards, allowing for interoperability in diverse environments and ensuring that organizations can leverage their existing infrastructure.

The A7173A is built on advanced technologies that enhance its performance and reliability. These include intelligent data buffering and error correction mechanisms, which minimize the likelihood of data loss and improve the integrity of information during transfers. Additionally, the controller features multiple device connections, accommodating up to 15 devices on a single chain. This scalability offers flexibility in expanding storage solutions based on organizational needs.

Another significant characteristic of the HP Ultra320 A7173A is its support for a wide range of operating systems. The controller is versatile, allowing it to integrate seamlessly with numerous enterprise platforms. This broad compatibility ensures that IT departments can deploy the A7173A within their existing environments without major adjustments or additional costs.

Moreover, the A7173A comes with comprehensive management features, enabling administrators to monitor and optimize storage performance effectively. These features help in anticipating issues before they escalate, thereby minimizing downtime and facilitating smoother operations.

In essence, the HP Ultra320 A7173A is a comprehensive SAN solution that offers exceptional speed, reliability, and scalability. Its advanced technologies and versatile compatibility make it an ideal component for organizations looking to optimize their data storage infrastructure while ensuring robust performance across diverse applications. Investing in the A7173A can lead to marked improvements in data management, ultimately contributing to business efficiency and continuity.