HP Ultra320 A7173A manual Using Support Tools Manager STM, HP Event Monitoring Services EMS

Page 61

#mptutil -R /dev/mpt14

******************************************************************************

****

 

 

****

****

M P T U T I L S u p p o r t

T o o l

****

****

 

 

****

****

for Ultra320 SCSI

Controller

****

****

 

 

****

****

Version 1.02 : Oct

22 2006

****

****

 

 

****

****

(c) Copyright 2003 Hewlett-Packard Development Company, L.P.

****

****

 

 

****

******************************************************************************

Successfully reset the stats

******************************************************************************

****End of MPTUTIL Output****

******************************************************************************

Use the -Soption to display mpt driver and associated device statistics.

Use the -Toption to dump the mpt driver trace information to the console.

Port Information

Use the -Poption to displays port information; the data is displayed as a series of hexadecimal words. For example:

#mptutil -P /dev/mpt14

******************************************************************************

****

 

 

****

****

M P T U T I L S u p p o r t

T o o l

****

****

 

 

****

****

for Ultra320 SCSI

Controller

****

****

 

 

****

****

Version 1.02 : Oct

22 2006

****

****

 

 

****

****

(c) Copyright 2003 Hewlett-Packard Development Company, L.P.

****

****

 

 

****

******************************************************************************

Port Facts (40 Bytes)

 

 

0x00410129

0x82280050

0x43492d58

0x20445541

0x4c204348 0x414e4e45

0x4c20554c

0x54524133

0x32302053

0x43534920

 

 

******************************************************************************

****End of MPTUTIL Output****

******************************************************************************

Using Support Tools Manager (STM)

STM is a software application that you can run from the console to obtain status and descriptive information about the A7173A adapter. STM can also be used to diagnose problems.

NOTE: You must use STM version C.46.00 or later with the A7173A adapter for HP-UX 11i v3 (February 2007).

For more information about STM and other online diagnostic tools, see the documents at:

http://docs.hp.com/en/diag.html#2%20Online%20Diagnostics

HP Event Monitoring Services (EMS)

Event Monitoring Service (EMS) notifies a system administrator when an event occurs on the system.

Using Support Tools Manager (STM) 61

Image 61
Contents HP-UX 11i v1, 11i v2, and 11i Copyright 2007 Hewlett-Packard Development Company, L.P Table of Contents Scsi Sense Codes Glossary Index Page Intended Audience About This DocumentHP-UX Release Name and Release Identifier Publishing HistoryNew and Changed Documentation in This Edition What’s in This DocumentTypographical Conventions Document OrganizationVia email netinfofeedback@cup.hp.com HP Welcomes Your CommentsPage About the A7173A Adapter HP A7173A Adapter OverviewPage Installation Overview Installing the A7173A AdapterLocating A7173A Adapter Software Installing A7173A Adapter SoftwareFiles Contained in the scsiU320-00 Bundle Processor Dependent Code PDC on HP 9000 Systems System FirmwareExtensible Firmware Interface EFI on HP Integrity Systems Offline Installation Installing A7173A Adapter HardwareOnline Installation Important Rules For Connecting Scsi Devices Connecting Scsi Peripheral DevicesConnecting External Devices Connecting Internal DevicesIdentifying Compatible Scsi Cables # ioscan -fnkd mpt Confirming the A7173A Adapter Firmware Version# mptutil /dev/mpt8 PCI-X Dual Channel ULTRA320 Scsi Adapter Verifying the InstallationAdding Multi-Initiator Support # mptconfig /dev/mpt8Page Setting the Scsi Parameters Configuring the A7173A AdapterSetting Scsi IDs Online Setting Scsi IDs OfflineAbout Scsi IDs About the Maximum Data Transfer RateSetting the Maximum Data Transfer Rate Online Setting the Maximum Data Transfer Rate OfflineAbout Bus Width Setting the Bus Width Online Setting the Bus Width OfflineAbout Auto-Termination Scsi ID Settings Configuration WorksheetUsing the BCH Menus on HP 9000 Systems Setting and Confirming Scsi Parameters OfflineConfirming the PDC Version Example 3-1 The BCH Main MenuDetermining Path, Bus, and Slot Information Example 3-2 I/O Interface Information Setting and Confirming the Data Transfer RateExample 3-4 Typical scsi rate Command Output Example 3-3 Typical BCH scsi Command Help ScreenDownloading the EFI Driver, EFI Utility, and Firmware Using the EFI Utility on HP Integrity SystemsStarting the pscsi Utility Configuring the Scsi Ultra320 Interface Scsi ExampleExample 3-6 Typical Adapter Properties Screen Configuring Scsi DevicesExample 3-7 Typical Device Properties Screen Downloading and Installing a Firmware ImageExample 3-9 Selecting a Firmware Image to Download Example Selecting a Controller for Firmware UpdateUpdating the EFI Driver Advanced Operations Display Vital Product Data VPD Setting and Confirming Scsi Parameters OnlineExiting the EFI Utility Example 3-10 Typical Vital Product Data Screen# mptconfig Using mptconfig for Online Configuration# mptconfig /dev/mpt14 Example 3-11 Typical ioscan -kfn Command Output# mptconfig -i 5 /dev/mpt14 Setting the Scsi ID Online# mptconfig -d /dev/mpt14 Using Common mptconfig Command Line OptionsConfiguring LUN Setting Scsi Parameters to Default ValuesUsing the A7173A Adapter as a Boot Device OfflinePerformance Tuning HP A7173A Administration and ManagementOnline Replacement of the A7173A Adapter Using mptutil to Verify or Update A7173A Adapter Firmware Verify or Update A7173A Adapter Firmware On HP 9000 SystemsExample 4-1 Typical ioscan -fnkd Command Output # mptutil /dev/mpt14 Example 4-2 Typical mptutil devicefile Command Output# mptutil -d /tmp/fw1.03.35.69IO /dev/mpt14 Example 4-3 Using mptutil to Update the Scsi Firmware OnlinePage General Troubleshooting Procedure TroubleshootingA7173A Adapter Is Claimed, But There Is No IO Creating Missing Device FilesNo Target Devices are Displayed in the ioscan Output Problems Detected By Domain ValidationConfirm Scsi Parameters Domain ValidationDomain Validation Fallback Levels Example 5-2 Typical Domain Validation syslog EntryUsing the mptutil Command # mptutil Example 5-3 Typical ioscan -fnkd mpt Command OutputChannel # mptutil -c /dev/mpt14 Example 5-5 Updating A7173A Firmware Online # mptutil -t tgtreset 1 /dev/mpt14Device Statistics and Trace Information # mptutil -t busreset /dev/mpt14# mptutil -u /tmp/fw1.03.35.69IO /dev/mpt14 HP Event Monitoring Services EMS Using Support Tools Manager STMPort Information # mptutil -R /dev/mpt14PCI Error Recovery HP Offline Diagnostics Environment ODEUname -r Contacting Your Hewlett-Packard RepresentativePage Scsi Sense Codes Example A-1 Typical Scsi Error MessageTable A-1 Scsi Status Codes complete list Table A-2 Scsi Sense Keys complete list Logical unit not ready, cause not reportable Logical unit not supported Medium format corrupted Erase failure Table B-1 A7173A Adapter Features and Specifications SpecificationsHP part number for easy identification when ioscan is used Regulatory Statements Regulatory InformationFCC Statement For U.S.A. Only IEC Statement WorldwideVcci Statement Japan Spécification ATI Classe a FranceFigure C-1 A7173A Adapter Declaration of Conformity Declaration of ConformityPage Bit GlossaryEeprom Nvram Vcci Wide Scsi Page Determining adapter’s path IndexIndex Page J6373-90030

Ultra320 A7173A specifications

The HP Ultra320 A7173A is a high-performance Storage Area Network (SAN) component, widely recognized for its reliability and efficiency in data storage solutions. Designed to support the demands of enterprise-level applications, this SCSI (Small Computer System Interface) controller excels in providing fast and reliable data transfer, making it a preferred choice for businesses that require robust storage solutions.

One of the standout features of the A7173A is its ultra-fast data transfer rate. It is capable of achieving speeds of up to 320 MB/s, which is made possible through the Ultra320 SCSI technology. This speed enhancement is crucial for applications requiring quick access to large volumes of data, thus improving overall system performance. The controller maintains compatibility with previous SCSI standards, allowing for interoperability in diverse environments and ensuring that organizations can leverage their existing infrastructure.

The A7173A is built on advanced technologies that enhance its performance and reliability. These include intelligent data buffering and error correction mechanisms, which minimize the likelihood of data loss and improve the integrity of information during transfers. Additionally, the controller features multiple device connections, accommodating up to 15 devices on a single chain. This scalability offers flexibility in expanding storage solutions based on organizational needs.

Another significant characteristic of the HP Ultra320 A7173A is its support for a wide range of operating systems. The controller is versatile, allowing it to integrate seamlessly with numerous enterprise platforms. This broad compatibility ensures that IT departments can deploy the A7173A within their existing environments without major adjustments or additional costs.

Moreover, the A7173A comes with comprehensive management features, enabling administrators to monitor and optimize storage performance effectively. These features help in anticipating issues before they escalate, thereby minimizing downtime and facilitating smoother operations.

In essence, the HP Ultra320 A7173A is a comprehensive SAN solution that offers exceptional speed, reliability, and scalability. Its advanced technologies and versatile compatibility make it an ideal component for organizations looking to optimize their data storage infrastructure while ensuring robust performance across diverse applications. Investing in the A7173A can lead to marked improvements in data management, ultimately contributing to business efficiency and continuity.