HP 3C509B-TP manual Vectra VL7 Driver Name Elnk3.vxd Size 30.2KB Date 7/18/96

4 Connecting to a Windows NT Server 4.0

Windows 95 SR2

Windows 95 SR2	Requirements
	• HP Vectra with Windows 95 SR2.
	• 3COM Etherlink 3C509-B Ethernet card and drivers disk ver 5.0.
	Vectra VL8 and VE7/VE8 Driver Name: W95EL5X9.INF Size:16KB
	Date: 6/11/97.
	• Vectra VL7 Driver Name: Elnk3.vxd Size: 30.2KB Date: 7/18/96.
	• DOS and MS-Windows for Workgroups 3.11 media.
	• Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/
	IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

		Vectra VL8	Vectra VL7		Vectra VE7/VE8
I/O Base Address		210	210		300
Interrupt Request		10	10		10
	Level
•	Boot PROM			Disabled
•	Transceiver Type			Auto Select
•	Network Driver Optimization			Windows or OS/2 Client
•	Maximum Modem Speed			9600 Bps
• Plug and Play Compatibility				Disabled
•	Full Duplex			Disabled

Procedure

1With the HP Vectra turned off, install the 3COM Etherlink III 3C509-B adapter card into an ISA slot.

2Connect network cable media to the 3COM 3C509B card.

3Insert a DOS bootable diskette and power on the machine.

4After booting, insert the 3COM drivers disk “Etherlink 3C509-B Ethernet Drivers Ver. 5.0.” and change to Drive A: , and execute “3C5X9CFG.EXE.”

5Select “Configure NIC,” and verify the resource settings listed above under the heading “Device Configuration.”