3 Connecting to a Windows NT Server 3.51
Windows 95 SR2
Windows 95 SR2 | Requirements | |
| • HP Vectra with Windows 95 SR2. | |
| • 3COM Etherlink | |
| • | Vectra VL8 and VE7/VE8 Driver Name: W95EL5X9.INF Size: 16KB |
|
| Date: 6/11/97 |
| • Vectra VL7 Driver Name: Elnk.Vxd Size: 30.2KB Date: 7/18/96 | |
| • | Windows 95 media. |
• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
|
|
| Vectra VL8 |
| Vectra VL7 |
| Vectra VE7/VE8 |
|
|
|
|
|
|
|
|
| |
I/O Base Address |
| 210 |
| 210 |
| 300 |
| |
|
|
|
|
|
|
|
| |
Interrupt Request |
| 10 |
| 10 |
| 10 |
| |
| Level |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• | Boot PROM |
|
|
| Disabled | |||
• | Transceiver Type |
| Auto Select | |||||
• | Network Driver Optimization |
| Windows or OS/2 Client | |||||
• | Maximum Modem Speed |
| 9600 Bps | |||||
• Plug and Play Compatibility |
| Disabled | ||||||
• | Full Duplex |
|
|
| Disabled | |||
Procedure
1With the HP Vectra turned off, install the 3COM Etherlink III
2Connect network cable media to the 3COM 3C509B card.
3Insert a DOS bootable diskette and power on the machine.
4After booting, insert the 3COM drivers disk “Etherlink
5Select “Configure NIC,” and verify the resource settings listed above