Auto Sync Adjustment
In some situations when showing a PC display, the picture may be cut off at the edges. To correct this, press auto sync on the the projector or remote control. Within 3 seconds, the projector will
The current source information will be displayed at the bottom right of the screen for 3 seconds.
The screen will be blank while auto sync is functioning.
Hide the Picture
In order to draw the audience’s full attention to the presenter, you can use hide to hide the screen image. Press hide again to restore the image. When this function is acti- vated with an audio signal con- nected, the background sound still can be heard.
If the picture remains hidden for a long time, the projector automati- cally shuts down. To set the delay, press menu and go to Advanced Setup > Power timeout.
Zoom / Focusing
Adjust the projected image to your |
|
|
desired size using the zoom ring. Then |
|
|
focus the image by rotating the focus |
|
|
ring. Refer to the screen size tables on | Focus ring |
|
page 16. |
| |
| Zoom out | Zoom in |
5. Operation | 23 |