6. Maintenance
Care of the Projector
Your projector needs little maintenance. Keep it clean for best performance.
Never remove any parts of the projector except the lamp. Contact your dealer if other parts needs replacing.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
Use a canister of compressed air to remove dust.
If there is dirt or smears, use
Never rub the lens with abrasive materials.
Cleaning the Projector Case
Before you clean the case, turn the projector off and unplug the power cord.
To remove dirt or dust, wipe the case with a soft, dry,
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case.
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.
Storing the Projector
If you need to store the projector for an extended time, please follow the instruc- tions below.
Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to page 36 in the manual.
Retract the adjuster feet.
Remove the batteries from the remote control.
Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.
6. Maintenance | 31 |