HP L1619A manual Showing Presentations, To make a wireless connection

Presenting from a Wireless Handheld Organizer

3.Click OK.

This action converts the document to landscape orientation (mobile presentation format). If the size of the document exceeds one page, the balance of the document is saved as additional slides until all the material is converted. Then the Wireless Presenter-to-Go creator window opens.

4.In the Wireless Presenter-to-Go creator window, set options as described earlier in the PowerPoint part of this topic.

5.To create a new presentation, click Create. Or

To add the slides to another presentation, select it from the Presentations List and click Append.

6.If you have sync software and a cradle installed on your computer, place the handheld organizer in its cradle and activate syncing.

7.In the Wireless Presenter-to-Go window, set Device to match your type of device from the drop-down box (and select a user for Palm), then click Transfer.

You can set other options as described earlier in the PowerPoint part of this topic.

Showing Presentations

This section describes how to show presentations that you have loaded onto your handheld organizer.

■“To make a wireless connection” on page 32

■“To start a presentation” on page 34

■“To disconnect and free the projector” on page 35

To make a wireless connection

If your handheld organizer has 802.11b wireless networking capability, you can connect to a projector without using any cables. You can make a wireless connection to the projector in two ways, depending on the projector setup:

■Ad Hoc connection—This is a direct wireless connection to a projector. The projector must have an optional wireless card installed, and it must not have a wireless connection to an access point.

32 User’s Guide